Bogen WMK1 产品宣传页

1.

With the wall box mounted, use wire nuts to connect AC
wiring. Install the AC receptacle in the top of the box 

using two #8 x ½" sheet metal screws.

2.

Bring all input and output wiring into the wall box, including
the speaker wires, through knockouts in the backbox.

3.

Before installing the front panel on the wall box, install 
the lock. 

4.

Make sure that the locking cam is down when in the
locked position.

5.

Mount the front panel and door assembly to the wall box 
with #8 x 1-1/4" sheet metal screws.

6.

Mount the Tinnerman clips on the sides of the wall box.

7.

Remove the feet from the amplifier. Install the amplifier
mounting screws in the door, using the feet to hold the
screws in place. Mount the amplifier to the front door.

8.

Connect speaker and input wiring to the amplifier.

9.

Plug the amplifier into the AC receptacle.

10. Raise the door to a level which allows the door stop to

be installed.

11. Mount door stop with two #6 by ¼" sheet metal screws.

12. Assure that the door lock operates correctly.

50 Spring Street, Ramsey, NJ 07446

Tel: 201-934-8500 • Fax: 201-934-9832

1A & 1B.