Foneric Electronics Co. Ltd L1 用户手册

Input: AC120V, 60Hz
Base type: E26
Rated Power: 6W
LED color range: 16 million colors with cool to warm whites
Color temperature: 2400K – 5300K
Luminous flux: 470 lumens
Bean angle: 220 degrees
Expected LED life: 22.8 years (25000 hours)

Enabling Alexa

1.Create an account in LinkWise App 
   (username and password are case 
   sensitive) and login to your account.

1. Download and open the free VOCOlinc LinkWise app from the App Store (Apple 
    App Store or Google Play).
2. Cut the power before you screw L1 into a desired light socket. L1 will light up in 
    white (5% brightness) to indicate it is ready for network setup. 
3. Make sure your iPhone or iPad (iOS 10.1 or later) is connected to a 2.4GHz Wi-Fi 
    network. Use the router utility software to turn off 5GHz Wi-Fi networks.
4. Log in or sign up for a VOCOlinc account (required for Alexa configuration).
5. Tap “+” icon located on the top left corner and follow the on-screen directions to 
    complete network setup.

    Note: To add more devices (or repeat L1 setup process), tap “+” and you will see 
    the accessory list. Each accessory has an identification code, e.g., 
    VOCOlinc-XXX-XXXXXX. Make sure the last 6 characters of the identification 
    code is consistent with the last 6 characters of MAC on the back of your L1.

6. When prompted, scan the setup code or manually enter the setup code, and then 
    follow the step to add the device to the Home and Room.
    After scanning the setup code, if the app prompts “Couldn’t add 
    VOCOlinc-XXX-XXXXXX”, please refer to the first FAQ. Please keep the setup 
    code for future use.
7. You can assign a name to your device and use this name when speaking to Siri. 
    For example, you can name your L1 “fun light”, then wake up Siri and speak 
    “Turn on the fun light”. 
8. Set up customized scenes to control multiple devices with a single command. 
    For example, if you assign the “I’m going to sleep” command to the scene of turning 
    off all the VOCOlinc lights in the bedroom. When you say “I’m going to sleep” to 
    Siri, The lights will be turned off.
9. The use of a HomeKit-enabled accessory need the follow permissions:
    Settings > iCloud > iCloud Drive > Turn On
    Settings > iCloud > Keychain > Turn On
    Settings > Privacy > HomeKit > LinkWise > Turn On

L1 smart Wi-Fi A19 Lightbulb is a tunable white, multi-color LED lightbulb that can 
be controlled wirelessly via iOS or Android smartphones and tablets, no hub required. 
You can customize your personal lighting using the VOCOlinc LinkWise App from 
anywhere with an active internet connection.

16 million colors
Works with Apple HomeKit
Works with Amazon Alexa
Remote Access

E26 Base

L1 Smart Wi-Fi A19 Lightbulb
Quick Start Guide

Smartphone or tablet running iOS 10 or higher; Android 4.3.x or higher
A Wi-Fi connection

2.Go to LinkWise App > long press the 
  device icon to enter the menu. Look for 
  "Third Party Connection". Tap "Alexa" 
  to complete configuration (iOS app only).

4.Discover L1 in the Alexa App, and then follow the steps to complete setup.

*If you change the name of the device in LinkWise App, you may sync the new 
name in Alexa App by re-discovering devices.

1. “Alexa, turn on (name)”
2. “Alexa, turn off (name)”
3. “Alexa, set (name) to x percent”
4. “Alexa, brighten (name)”
5. “Alexa, brighten (name) by x percent”
6. “Alexa, dim (name)”
7. “Alexa, dim (name) by x percent”
8. “Alexa, set (name) to (color)”
9. “Alexa, change (name) to (color )”

Alexa Skills

Resetting the smart lightbulb can help you troubleshoot any issues you may have. 
To reset it to factory defaults:

1. Turn the light switch controlling the bulb to the OFF position.
2. Flip the light switch on and off 3 times. Time lag between each cycle must not 
    exceed 5 seconds. 

The smart lightbulb will flash three times once reset is completed.

Factory Resetting

MPE Requirements

2

3

4

5

6

* If you set the brightness to 0% before turning off the light switch, the smart 
lightbulb will resume to 5% brightness as soon as you turn on the lightswitch again 
to indicate that it is in good shape.

- WARNING: RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light 
  switch controlling the bulb and WAIT for the bulb to cool down before attempting 
  to change it
- DO NOT install the Smart Wi-Fi LED Bulb with wet hands or when standing on 
  wet or damp surfaces
- Not suitable for use with standard in-wall dimmers. Dimmable via the app only
- Suitable for use in operating environment between 0°C and 40°C (32°F and 104°F)
- This device is not intended for use with emergency exit luminaires
- NOT FOR EMERGENCY LIGHTING
- For indoor use only
- DO NOT disassemble
- DO NOT clean with liquid

 

 

 

 

Turning on 
the first time

Searching Wi-Fi

Pairing

Device added successfully

Identifying the lightbulb

White light at 5% brightness

White light at 5% brightness

White light at 50% brightness

White light at 5% brightness quickly 
flashes 5 times

Firmware update completed

Flashes twice

www.vocolinc.com

VOCOlinc App

Scan QR Code

Scan QR Code

Setup code

3.Open Alexa App and enable VOCOlinc Alexa skills using the same account info.

7[OIQ9ZGXZ-[OJK

This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the 
    receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons during
device operation.

To ensure compliance, operations at closer than this distance is not recommended.
L'antenne installée doit être située de facon à ce que la population ne puissey être 
exposée à une distance de moin de 20 cm. Installer l'antenne de facon à ce que le 
personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’ antenne.

La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au
moins 20 cm des personnes pendant son functionnement

9

Apple, iPad, iPad Air, iPhone, and iPod touch are trademarks of Apple Inc., 
registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. 

Use of the Works with Apple HomeKit logo means that an electronic accessory has 
been designed to connect specifically to iPod, iPhone, or iPad, respectively, and 
has been certified by the developer to meet Apple performance standards. Apple is 
not responsible for the operation of this device or its compliance with safety and 
regulatory standards.

Controlling this HomeKit-enabled accessory automatically and away from home 
requires an Apple TV with tvOS 10.1 or later or an iPad with iOS 10.1 or later set 
up as a home hub. 

To control this HomeKit-enabled accessory, iOS 10.1 or later is recommended.

3. Wait until the network is fixed if your router performs poorly in wireless networks 
    that might result from network congestion.
4. Check the router setting and see if there is any limit to the number of simultaneous 
    client connections.
5. Restart your HomeKit accessory or restore your HomeKit accessory to factory 
    settings, and add your HomeKit accessory to the Vololinc LinkWise app.
6. Update LinkWise App and product firmwares to the latest version.

1. Make sure the number of Wi-Fi connected devices is within the wireless network 
    capacity of your router. Otherwise, please replace with another router.
2. Reconnect your iOS devices to Wi-Fi and make sure your Wi-Fi signal is strong 
    enough.

Q4. Can I control multiple Smart Wi-Fi LED Bulbs at the same time?
Yes. You can manage and save multiple bulbs together as a “scene”.

The Smart Wi-Fi LED Bulbs are not designed for use with traditional wall-dimmer. 
It can only be dimmed via the LinkWise app.

This is a preset setting to indicate that the smart lightbulb is in good shape.

- Mobile device running iOS10+ or Android 4.3+
- Existing Wi-Fi network

*Place the Smart Wi-Fi LED Bulb within the range of your Wi-Fi router or access 
  point (approximately 100 feet).

*Avoid physical obstructions and radio interference in the surrounding area.

1. Modification of the router configuration/settings will cause non-resumable 
    disconnection of the device. Delete and add the devices again after factory reset 
    following steps in Q1.
2. Unstable network signal could cause disconnection of the device. Wait for about 
    2 minutes for automatic re-connection. If the connection does not resume after a 
    while, power off L1 and then put it back on. It shall re-connect automatically. 
3. If the above is not effective, delete and add the devices again after factory reset 
    following steps in Q1.

If you have more questions, please feel free to contact us: 

support@vocolinc.com.

1. Make sure your accessory is powered on and nearby.
2. If you use a dual 2.4G/5G network router, please turn off the 5G network. Connect 
    your phone with 2.4G network and add the device again.
3. Make sure that the router setting meets the relevant requirements. The device 
    only supports the mode of WPA/WPA2-PSK.
4. Make sure that L1 is in pairing mode. If not, please reset L1 to factory defaults.
5. Select the accessory shown on screen, then scan the setup code (XXX-XX-XXX) 
    which can be found on the device, instruction manual or inner packaging.
6. If the app prompts “Couldn’t add L1-XXXXXX” after you scan the setup code:
    (1) Close the app
    (2) Reboot the phone
    (3) Restore L1 to factory settings
    (4) Add the device again

1. Launch LinkWise.
2. Long press L1 icon to enter the menu.
3. Look for “Firmware update” and tap it, and then tap “Update”.

*Only the smart lightbulbs that are currently reachable and have an available update 
will prompt firmware update notice.

*It is important to leave the LinkWise app running while it finishes updating the smart 
lightbulbs. Try not to minimize the app, close the app, or interrupt the update to 
prevent problems.

To gain better experience with L1, we strongly recommend that you update the 
firmware whenever updates with all the latest improvement and fixes are available:

Firmware Update

7

8

成型尺寸: ZOO
128g双铜纸，印4C，表面过光油，正反折