Bogen WB1EZ 产品宣传页
The Bogen WB1EZ Wall Baffle Speaker is an 8" cone speaker enclosed in a simulated walnut-finished
wooden enclosure with a black grille cloth on front. The WB1EZ is a 1-watt single-tap speaker with
recessed volume control designed for use in 70V amplifier systems.
Designed for easy wall-mount installation, the WB1EZ comes pre-assembled.
wooden enclosure with a black grille cloth on front. The WB1EZ is a 1-watt single-tap speaker with
recessed volume control designed for use in 70V amplifier systems.
Designed for easy wall-mount installation, the WB1EZ comes pre-assembled.
• Features screw terminal connections for fast
wire lead connection
• 1W single-tap design
• Works with 70V amplifier outputs
• High intelligibility and efficiency
• Works with 70V amplifier outputs
• High intelligibility and efficiency
• Simulated walnut vinyl finish
• Designed for easy wall-mount installation
• 8" cone speaker
• Wooden cabinet
• Recessed volume control
• Designed for easy wall-mount installation
• 8" cone speaker
• Wooden cabinet
• Recessed volume control
Features
Description
Specifications subject to change without notice.
© 1999 Bogen Communications, Inc.
Part No. 54-7886-01B Printed in U.S.A. 0303
© 1999 Bogen Communications, Inc.
Part No. 54-7886-01B Printed in U.S.A. 0303
Easy Design
™
Wall Baffle Speaker
Model WB1EZ
Power Rating (RMS):
1-
watt, continuous
Frequency Response:
50 Hz to 12 kHz
Impedance:
4900 ohms (for use on 70V amplifier outputs)
Sound Pressure Level:
95 dB at 4 ft. with a 1-watt input on axis
Dimensions:
9-
1
/
2
" W x 9-
1
/
2
" H x 5-
1
/
4
" D (3-
1
/
4
" D @ bottom)
Shipping Weight:
1
9 lb.
Finish:
Simulated walnut vinyl
Technical
Specifications
Specifications
The surface mounting loudspeaker shall be a
Bogen Model WB1EZ, or equivalent, 8" cone-type
loudspeaker having a frequency response of at
least 50 Hz to 12 kHz.The on axis sound pressure
level shall be 95 dB, at least four feet with one-watt
input. The loudspeaker shall have a six-ounce
ceramic magnet and a
Bogen Model WB1EZ, or equivalent, 8" cone-type
loudspeaker having a frequency response of at
least 50 Hz to 12 kHz.The on axis sound pressure
level shall be 95 dB, at least four feet with one-watt
input. The loudspeaker shall have a six-ounce
ceramic magnet and a
3
/
4
" voice coil.
The loudspeaker shall be assembled in a wall baffle
for surface-mounting, angled for additional down-
ward sound dispersion. The baffle shall be con-
structed of
for surface-mounting, angled for additional down-
ward sound dispersion. The baffle shall be con-
structed of
3
/
8
" particle board, glued and covered in
simulated walnut vinyl. Glue blocks shall be used to
reinforce all side corner joints.The speaker open-
ing shall be covered with a black grille cloth.
Overall dimensions shall be 9-
reinforce all side corner joints.The speaker open-
ing shall be covered with a black grille cloth.
Overall dimensions shall be 9-
1
/
2
" W x 9-
1
/
2
" H x
5-
1
/
4
" D [top] (3-
1
/
4
" D base).
Architect
and Engineer
Specifications*
and Engineer
Specifications*
50 Spring Street, Ramsey, NJ 07446
Tel. 201-934-8500; Fax: 201-934-9832
Web Site: www.bogen.com
Tel. 201-934-8500; Fax: 201-934-9832
Web Site: www.bogen.com
* Architect and Engineer Specifications are available on CD and online
in a Word document to assist you with preparing your bids.
in a Word document to assist you with preparing your bids.