Vita-Course Technologies Co. Ltd. DISCOVERY 用户手册
Do not fully immerse accessories of the equipment in water solution, accessories or detergents.
6.3. Maintenance test
6.3.1 Routine test
Before using the equipment, you need to carry out the following inspection:
Check whether the host has any mechanical damage;
Check whether the structure performance of all accessories (including plug and sensor) is
complete;
complete;
Check all available measurement function to make sure that the equipment can work well;
If there is any obvious indication of the damage of the equipment, please stop using it and
contact with supplier.
If there is any obvious indication of the damage of the equipment, please stop using it and
contact with supplier.
6.3.2 Periodic test
Every year or after the maintenance every time, a thorough inspection, including function and safety,
of the equipment must be carried out by qualified personnel.
of the equipment must be carried out by qualified personnel.
I
f y the hospital using the equipment cannot implement a satisfactory maintenance project, it will
result in equipment failure, and may endanger the health of human body.
If the pulse wave sensor and the cable are damaged or deteriorated, stop using it and replace new
cables.
6.3.3 Battery maintenance
This equipment adopts the built-in battery, which cannot be arbitrarily removed from it;
Does not charge the battery using other power device, so as not to damage the battery;
The aging b
attery cannot be thrown away in the fire, so as to avoid the explosion;
Do not use the battery to supply power for other electronic devices;
Destruction of battery should comply with local laws and regulations;
In order to extend the useful life of battery, please use battery properly and regularly carry out the
maintenance and preservation. The equipment should be charged regularly for maintenance though
it is not used for a long time. Generally, it should be charged once a month and 4~6 hours each time;
it is not used for a long time. Generally, it should be charged once a month and 4~6 hours each time;
Please contact with our company directly if battery is already broken;
This equipment is equipped with a built-in battery. Regardless of whether the boot for the use, as
long as
alternating current (AC) is connected with the equipment, the process of charging is working.
When the battery is full, please disconnect the AC because charging time should not exceed 12
hours;
hours;
Please use the power adapter configuration provided by our company.