Dongguan Vatro Electronics Technology Co. LTD C3C 用户手册
Wireless Charger C3C Instruction
Product Features & Specifications
1. Combination of ABSand fire-proof PC.
2. Intelligent identification of bright light design, automatic identification of charging equipment.
3. In normal temperature and not turn hot when charging.
Material: ABSand fire-proof PC
Input Voltage/Current: 5V/2A 9V/1.7A
Output Voltage/Current: 5V/1A 9V/1.1A
Input interface: Micro
Transmission distance: ≤8MM
Charging efficiency: ≥73%
Dimension: Φ100*13mm
Weight: 85g
Using Guide
The product includes wireless charger. When using this product, please connect the USB cable directly to the
wireless charger USB port.
wireless charger USB port.
Connect the adapter to charge
1. Connect the wireless charger to the adapter with USB cable.
2. When Power on, the indicator of wireless charger will shortly flashing and off, the product is under standby
mode.
3. Put the mobile phone with wireless charging function on the wireless charger, when mobile phone is under
charging, then indicator will keep shinning as white .
After the mobile phone full charging, the indicator of the wireless charger will off automatically.
5. If the indicator of the wireless charger is under quick flash mode, means the wireless charger is in abnormal
working condition.
( For example: ①The transmitter coil and the receiver coil are not kept in same position;; ②transmitter or
receiver is abnormal etc)
Note: At present, Android support the function of the full charging feedback, the feedback is like the above, the
rest of the phones with full charging while the charging board won’t be prompted.
2. When Power on, the indicator of wireless charger will shortly flashing and off, the product is under standby
mode.
3. Put the mobile phone with wireless charging function on the wireless charger, when mobile phone is under
charging, then indicator will keep shinning as white .
After the mobile phone full charging, the indicator of the wireless charger will off automatically.
5. If the indicator of the wireless charger is under quick flash mode, means the wireless charger is in abnormal
working condition.
( For example: ①The transmitter coil and the receiver coil are not kept in same position;; ②transmitter or
receiver is abnormal etc)
Note: At present, Android support the function of the full charging feedback, the feedback is like the above, the
rest of the phones with full charging while the charging board won’t be prompted.