Authentrend TECHNOLOGY INC. ATKEYCARD1 用户手册
29
Extra Highlights and Trouble Shooting
Pending mechanism for security
Security level is high: Fingerprint FAR < 1/50000, FRR < 2%
For even higher security, we support “lock” mechanism to avoid trying by fake fingerprint
For even higher security, we support “lock” mechanism to avoid trying by fake fingerprint
continuously
Allow 5 times fingerprint verifications, if it fails 5 times continuously:
1
1
st
time: lock card for 1 hour
2
nd
time or later: lock card for 12 hours
Battery
From factory finish good, it is 3.8V (~50%)
Battery low is 3.67V (~35%), please do battery charge
If the battery is lower than 3.4V, ATKey.card can not boot
Battery low is 3.67V (~35%), please do battery charge
If the battery is lower than 3.4V, ATKey.card can not boot
You need doing battery charge for a while (ATKey.card is no response at
beginning), then ATKey.card can boot again
If the battery is lower than 3.0V, battery protects by Hardware (PCM)
You need doing battery charge for a while (no response from ATKey.card for
a while).
Bluetooth
We are BLE mode (Bluetooth smart), it’s low power consumption (comparing with
Bluetooth mode)
ATKey.card is USB data mode (insert PC or ..), we will stop BLE mode; but if
ATKey.card is USB battery charging (using USB power adapter), BLE is still ON.
Demo Video