Arlo Technologies Inc. 18200352 用户手册
Settings
49
The My Devices page displays.
3. Select the Arlo Go camera that you want to update.
4. Tap or click Device Info > Firmware > Update.
WARNING: Do not disconnect your camera, open the battery door, or remove the
battery while the firmware update is in progress.
battery while the firmware update is in progress.
5. Wait for the firmware update to complete.
The camera’s LED blinks amber and blue while the firmware is downloading and
installing. After the firmware is installed, the camera reboots and the LED is off.
When the LED lights again and the pattern stops changing, your camera is available
to stream.
installing. After the firmware is installed, the camera reboots and the LED is off.
When the LED lights again and the pattern stops changing, your camera is available
to stream.
View or Change Cellular Network Settings
¾ To view or change cellular network settings:
1. Tap
the
Arlo icon
on your mobile device.
You can also enter
arlo.netgear.com
in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
The Settings page displays.
3. Select the Arlo Go camera.
The My Devices page displays.
4. Scroll down to the NETWORK section.
This section displays techncial information about the Arlo Go camera’s cellular
network connection settings.
network connection settings.
5. To view or change APN settings, tap or click APN Settings.
The Edit APN page displays.
Changing the APN might cause your camear to be unreachable to the network.
Do not change these settings unless instructed to do so by network support.
Do not change these settings unless instructed to do so by network support.
49
49