Gosuncn Technology Group Co. Ltd. GW521 用户手册

IP address

6

7

8

99

9

10

11

Use a browser to login the web management page to 
configure and manage the CPE.

You can login to the web management page after the 
password is verified.

Step 1 Connect the CPE properly.
Step 2 Launch Internet Explorer, enters http://192.168.1.1 in 
the address bar, and press Enter.

Step 3 Enter the user name and password, and login.

The default configuration are auto connect and scan full 
band, if you want to connect the LTE network according to 
your requirement, you can set the connect method as 
manual, and just scan some specified band.

If the problem persists, please contact authorized local 
service suppliers.

Step 1 Connect the CPE properly.
Step 2 Login to the web management page.
Step 3 Chose Network→LTE Setting.
Step 4 Set Connect Mode and Scan mode.

Step 1 Connect the CPE properly.
Step 2 Login the web management page.
Step 3 Chose Wi-Fi→WLAN Setting.
Step 4 In the General Settings area, set Wi-Fi to Enable, or 
           enable Wi-Fi with Wi-Fi button.
Step 5 In the Setting area, modify the SSID, such as “LTE-Router”.
Step 6 To ensure your data safety, it is recommended that you 
           change the default Wi-Fi password.
Step 7 Click Submit to save the configuration.

The POWER indicator does not turn on.

・

Make sure that the power cable is connected properly and 

    the CPE is powered on.
・

Make sure that the power adapter is compatible with the CPE.

Fails to login the web management page.

・

Make sure that the CPE is started.

・

Verify that the CPE is correctly connected to the computer 

    through Wi-Fi or a network cable.

The CPE fails to search for the wireless network.

・

Check that the power adapter is connected properly.

・

Check that the CPE is placed in an open area that is far away 

    from obstructions, such as concrete or wooden walls.
・

Check that the CPE is placed far away from household 

    electrical appliances that generate strong electromagnetic 
    field, such as microwave ovens, refrigerators, and satellite 
    dishes.

The power adapter of the CPE is overheated.

・

The CPE will be overheated after being used for a long time. 

    Therefore, power off the CPE when you are not using it.
・

Check that the CPE is properly ventilated and shielded from 

    direct sunlight.

The parameters are restored to default values.

・

If the CPE is powered off unexpectedly while being configured, 

    the parameters may be restored to the default settings.
・

After configuring the parameters, download the configuration 

    file to quickly restore the CPE to the desired settings.

This product has reached the standard of shipment inspection.

MLH9A11
4.2.2.0-30436-BYPASS-1.1.1
864537022230714
460680004200068

LTE-Router
32

WPA-PSK&WPA2-PSK
TKIP&AES

Some features of the product and its accessories described herein rely on 
the software installed, capacities and settings of local network, and may 
not be activated or may be limited by local network operators or network 
service providers, thus the descriptions herein may not exactly match the 
product or its accessories you purchase.
GOSUNCN reserves the right to change or modify any information or 
specifications contained in this manual without prior notice or obligation.

・

This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that 

may cause undesired operation.
・ 

This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged 

to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

—Consult the dealer or an experienced radio/ TV technician for help.
・ 

Changes or modifications not expressly approved by the manufacturer could 

void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. To comply with FCC RF Exposure compliance 

requirements, this grant is applicable to only Mobile Configurations. The 

antennas used for the transmitter must be installed to provide a separation 

distance of at least 20cm from all persons and must not be co-located or 

operating in conjunction with any other antenna or transmitter.

The device is restricted to indoor use.

Notice

XXXXXX