Novolink Inc. NLBLLIGHTSV01 用户手册
Installation:
1. Before use and mounting, place the
light set on a clean, flat surface and
check for any damage to the LED lights,
connections, interconnection coupler,
supply cord or adapter plug.
2. Never use sharp or pointed objects to
install / mount a string light set or chain.
3. Fixing with metal or braided wire,
or similar devices is not advisable.
Metal or braided wire can damage the
insulation layers of the light set.
4. Suitable installation devices include
cable conduits or soft cable ties. When
using cable ties, ensure they are not
excessively tightened to the string to
avoid damage to the insulation layers of
the light set.
5. The supply cord and rope body must
not be subject to push, pull or torsion
forces.
6. Ensure a correct and secure connection
between the supply cord and the
light chain coupler, as well as for all
interconnected light chains. The end
cap of the last light set must always be
in place and tightened.
7. When connecting additional lights
to a set, make sure the Controller/
Transformer portion of the lights is not
plugged-in and powered.
8. Ensure that the light chain, supply
cord or interconnection couplers are
not located in or near running water or
drains (e.g. snow, streams, rain gutters).
9. If the light set does not work, have it
checked by a certified technician.
Instructions for Use
Once the light set is properly mounted,
and attached to the power adapter, plug
the adapter into the appropriate electrical
outlet.
The lights should turn ON, and may already
The lights should turn ON, and may already
be set to one of 8 settings, including 6
flashing settings, one steady setting, and
one “All-in-One” setting that cycles through
all 6 flashing patterns.
Press the button on the control box to
Press the button on the control box to
select a different light mode. These light
modes include: “All-in-One” Combination
> Glimmer > Twinkle > Sparkle > Flash >
Starry > Pulse > Steady > OFF.
The built-in timer will keep the lights on
The built-in timer will keep the lights on
for 6 hours after a light mode is selected.
Afterwards, it will turn-OFF automatically.
the light will turn-ON again after 18 hours
unless the OFF mode is selected.
Adding Extensions:
Up to 2 extensions can be attached in a
light string. Extensions for the string lights
can be purchased at www.shopNovolink.com.
LED String Lights with Wireless Smart Control
Thank you for purchasing our Novolink Outdoor String Lights!
To insure proper installation and prior to use, please read these
instructions and all warnings thoroughly.
Need Add-on Extensions or
additional String Lights?
www.shopNovolink.com