SHENZHEN HAOHUALIANHE TECHNOLOGY CO. LTD. ADYSS-A19 用户手册
ADYSS-A19
说明书260*120mm
支持手机型号:
产品参数:
最大承重能力 ： 500g
主要材料 ：ABS塑料
产品净重 ：187g
产品频率 ：2.4G
充电时间 ：0.5小时
工作电流 ：3.5mA
工作电压 ：3.6~4.2V
工作温度 ：-10°~+40°
电池容量 ：补光灯/80mAh；遥控器/55mAh
充电电压 ：DC 5V
待机时间 ：半年
补光时间 ：1小时
一年有限保修摘要
ADYSS保证所附带的硬件产品，从原先零售购入的日期一年内在材料和工艺
方面无瑕疵,均可受理售后问题。ADYSS对正常使用磨损不做担保，对于事故
或滥用造成的损坏也不做担保。若要获取服务可访问ADYSS拥有的零售店或
ADYSS授权服务商，即可为你的产品酌情进行修理、更换你享有的保修权益
是附加在本地消费者法律所提供的权利以外的。当您根据本保修政策提出索
赔时，可能需要提供购买证明的详细信息。
方面无瑕疵,均可受理售后问题。ADYSS对正常使用磨损不做担保，对于事故
或滥用造成的损坏也不做担保。若要获取服务可访问ADYSS拥有的零售店或
ADYSS授权服务商，即可为你的产品酌情进行修理、更换你享有的保修权益
是附加在本地消费者法律所提供的权利以外的。当您根据本保修政策提出索
赔时，可能需要提供购买证明的详细信息。
1
2
3
4
长按开机键“ ”两秒钟开启设备
待蓝灯亮起闪烁
打开手机设置，搜索连接设备
点击“ ADYSS ”连接设备等待5秒，蓝灯长亮配对成功
注意事项（不在保修范围） ：
● 使用自拍杆前请确保手机完好的固定在夹头上，智能机脱落等产生的损伤
● 使用前请确认使用地域和设施限制的场所，禁止违反公共秩序的行为 。
● 使用期间将电源线强力拉、旋转等导致断线 。
● 高出跌落导致外壳损伤不良 。
● 使用超出产品负荷电源，导致产品发热及电路板烧坏 。
苹果系列机型 (iOS 5.0 以上系统）
安卓系列机型 (Android 4.2.2以上系统)
请按时更新手机系统，避免版本过低无法兼容使用
欢迎使用补光自拍杆,使用前请给自拍杆充电半小时!
连接操作步骤：
执行标准:Q/QTP :002-2016
Made in China
请勿将产品置入低温、潮湿地方
请勿将产品丢入火中、远离火源
警告: 内含小零件
不适合3岁及以下儿童使用
产品操作步骤:
支架收起前
需要将锁紧装置“ ”向右→推
至状态“ ”方可收起
打开支架后
将锁紧装置“ ”向左←推，至状态“ ”
拉伸杆
快门按键开关
金属支架
补光灯
补光灯开关
竖拍模式
横拍模式
松开扭头,可上下角度调节
完成角度调节后,锁紧扭头
补光灯开关按键，三挡灯光切换，长按爆闪
充电孔
充电孔
遥控器跟手机连接，遥控有效距离 10米
长按“ ”三秒蓝灯闪烁,手机设置
搜索：”ADYSS”点击连接,蓝灯长亮完成配对
开启相机即可拍照、摄像
支架模式，支架位于手柄处凹槽
使用时向外打开
遥控器、补光灯为 Micro USB充电接口
充电时间：0.5小时
使用常规DC 5V USB充电器充电
握住手柄拉起夹头装入手机
注意：仅支持6英寸以下屏幕手机
Net Weight：187g
Operating frequency：2.4GHZ
Charging time：0.5/h
Max load capacity：500g
Battery capacity：Fill light / 80mAh;
remote control / 55mAh
Operating frequency：2.4GHZ
Charging time：0.5/h
Max load capacity：500g
Battery capacity：Fill light / 80mAh;
remote control / 55mAh
One Year Limited Warranty Summary
Executive standard:
Q/QTP :002-2016
FCC ID: 2ARFL ADYSS-A19
Q/QTP :002-2016
FCC ID: 2ARFL ADYSS-A19
Made in China
Do not place the product in
low-temperature and humid place.
low-temperature and humid place.
Do not throw the product into the
fire and keep away from the fire.
fire and keep away from the fire.
Warning: Contains small par ts.
Not suitable for children 3 years
old and below.
Not suitable for children 3 years
old and below.
Product operating steps:
Before the bracket is retracted, you need to
turn the locking device “ ” to the right
→ push to the state “ ” to close it.
turn the locking device “ ” to the right
→ push to the state “ ” to close it.
1
2
3
4
Press and hold the power button " " for 2 seconds to turn on the device.
Open phone settings, search for link devices
Click "ADYSS" to connect the device and wait for 5 seconds.
The blue light is brightly paired successfully.
The blue light is brightly paired successfully.
Welcome to use the fill-light selfie stick
Please charge the selfie stick for 0.5 hours before use!
Please charge the selfie stick for 0.5 hours before use!
Connection steps:
Wait until the blue light is on
S u p p o r t e d m o b i l e p h o n e m o d e l :
Matter s need attention (not involved in the warranty)
● Before using the selfie stick, please make sure that the phone is properly
fixed on the collet, and the damage caused by the smart phone falling off.
fixed on the collet, and the damage caused by the smart phone falling off.
● Pulling and rotating the power cord during using period which causes
short circuit.
short circuit.
Apple series models (iOS 5.0 and above)
Android series models (Android 4.2.2 and above)
P l e a s e u p d a t e y o u r p h o n e s y s t e m o n t i m e t o a v o i d t h e v e r s i o n
b e i n g t o o l o w t o b e c o m p a t i b l e f o r u s i n g .
b e i n g t o o l o w t o b e c o m p a t i b l e f o r u s i n g .
● Please confirm the place of using region and facility restrictions before
u s i n g , a n d p r o h i b i t t h e b e h a v i o r o f p u b l i c p r o p e r t y v i o l a t i o n s .
● Falling from a high place that causes damage to the outer casing.
● Using a power supply that exceeds the product load that causes the product
● Using a power supply that exceeds the product load that causes the product
heating up and the circuit board burning out.
Parameter
Working current：3.5mA
Working voltage：3.5~4.2V
Charging voltage：DC 5V
Operating temperature：-10°~40°
Standby time：half a year
Main material：ABS plastic
Working voltage：3.5~4.2V
Charging voltage：DC 5V
Operating temperature：-10°~40°
Standby time：half a year
Main material：ABS plastic
ADYSS guarantees that the attached hardware products can accept the
after-sales problems in terms of materials and processes within one year from
the original retail purchase date. ADYSS does not guarantee the normal use of
wear and tear, nor does guarantee the damage caused by accident or abuse. If
you want to obtain service, you can visit the retail store or ADYSS Authorized
Service Providers to repair and replace your products as appropriate. The
warranty interest you possess is in addition to the rights provided by local
consumer law. When you claim for compensation under this warranty policy,
you may need to provide the detailed information of the purchase certificate.
after-sales problems in terms of materials and processes within one year from
the original retail purchase date. ADYSS does not guarantee the normal use of
wear and tear, nor does guarantee the damage caused by accident or abuse. If
you want to obtain service, you can visit the retail store or ADYSS Authorized
Service Providers to repair and replace your products as appropriate. The
warranty interest you possess is in addition to the rights provided by local
consumer law. When you claim for compensation under this warranty policy,
you may need to provide the detailed information of the purchase certificate.
Stretching rod
Shutter switch
Metal bracket
Fill light
Fill light switch
Charging hole
Charging hole
Vertical mode
Horizontal mode
Loosen the twist head and adjust the angle
up and down. After the angle adjustment is
completed, lock the twist.
up and down. After the angle adjustment is
completed, lock the twist.
Fill light switch button, third gear light
switch, long press strobe
switch, long press strobe
The remote control is connected to the mobile
phone, and the remote control effective distance
is 10 meters.
Long press “ ” for three seconds and
blue light will flash, mobile phone settings
search: ”ADYSS“ click the link, Blue light to
complete the pairing, turn on the camera to
take photos and videos
blue light will flash, mobile phone settings
search: ”ADYSS“ click the link, Blue light to
complete the pairing, turn on the camera to
take photos and videos
After opening the bracket, push the locking
device" " to the left ← to the state " "
device" " to the left ← to the state " "
Bracket mode, the bracket is located at the
handle groove, open outwards when using.
handle groove, open outwards when using.
Remote control, fill light for Micro USB charging interface
Charging time: 0.5 hours
Charge using a regular DC 5V USB charger
Hold the handle to pull the collet and embed
the phone, pay attention: it only supports
screen mobile phones below 6 inches
the phone, pay attention: it only supports
screen mobile phones below 6 inches
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply
with the limits for a Class B digital device,pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
with the limits for a Class B digital device,pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
by the party responsible for compliance could void the user's authority to
operate the equipment.