Shenzhen Ouli Technology Co. Ltd. SL-190 用户手册
Precautionary Measures
Do not use the adapter if the housing is damaged.
Do not expose the adapter to any kind of liquid or moisture.
This adapter must not be combined with another adapter.
This adapter is not converting voltage, the input voltage of the
device you want to connect must match the local power network
voltage.
In order to prevent from overheating, use only type T 6A fuses
(ceramicor glass).
Keep away from children.
Disconnect the adapter from the receptacle of the electrical
circuit when you are not using it. improper use of the adapter
automatically voids themanufacture’s warranty. The manuf-
acturer assumes no liability fo damages.
You must keep these instructions for future use.
●
●
●
●
●
●
●
●
Power indicator:
The indicator will be light up permanently
when plug in
WAN/LAN LED indicator:
Light up only: no network connection,no
network signal detected
Light shining: network connection successful,
with network signal detected
WIFI LED indicator:
Light up only: WIFI router function is off
Light shining: WIFI router function is on
POWER
WAN/LAN
WIFI
WIFI LED Indicatior
for SMART
PHONE
for PAD
for NOTEBOOK
One 10/100Mbps WAM AN Port
(RJ45)
One Peset Button
IEEE 802.11n/g/b(MAX.150Mbps)
AP Mode/pouter Mode/Repeater
Mode CIient Mode
Enaole Wireless Radio,
Enaole Wireless Radio,
WDS Bridge,WMM,Wireless
Statistics
64/128/152-bit WEP,WPA/WPA2,
64/128/152-bit WEP,WPA/WPA2,
WPA-PSK/WPA2-PSK
Interface
WIFI
Standard
WIFI
Modee
WIFI
Function
Encryption
WI-FI
RESET WIFI W/LAN POWER
WAN/LAN
IP:192.168.169.1
Max:1440W-240V,
600W-100V
Electrical
household
appliances
Mobilephone
MP3/MP4
PSP
八
Australia/New Zealand
Slightly press the button and slide to the right for
USA/AUST plug completely as shown.
Make sure the contact blades are turned to “ ”
position.
USA
Slightly press the button and slide to the right for
USA/AUS plug completely as shown.
Make sure the contact blades are turned to the
parallel position.
United Kingdom
Slightly press the button and slide to the left for
UK plug completely as shown.
Pull out the insulated ground pin from the adapter.
Pull out the insulated ground pin from the adapter.
EUROPE
Make sure the button is and slide back to the
center, then press the button for Europe plug to
pop out as shown.
Features:
-
0
.
AC Power Rating:6A max100-240Vac (6 0W max
at 1 0V,
W max at 2 0V)
0
1440
.
4
- Single Plug Safety
- USB Input: 5V 2.4A
- Built-In Safety Shutters
- Patent Protected
- LED Power Indicator
-
- Patent Protected
- LED Power Indicator
-
WIFI)
Cable wireless Internet access(
The wireless signal amplification function(
-
AP Client)
Covers more than 150 countries with US/EU/UK/AU
plugs.
Built-in safety shutters, protect users from the direct
touch of the live parts on the socket .
Only one plug-type can be used at one time by sliding
the knob selection, other plug-pins are locked
automatically.
plugs.
Built-in safety shutters, protect users from the direct
touch of the live parts on the socket .
Only one plug-type can be used at one time by sliding
the knob selection, other plug-pins are locked
automatically.
WIFI & USB
TRAVEL ADAPTER
ADAPT TO THE WORLD
When the adapter is plugged into the wall
socket, the “power”indicator should light on that
the AC power and USB are in operation.
This product may not work with certain high
ower appliances such as hair dryers. Check
your appliance label to comfirm if it requires
less than 6A.
After adapter WIFI signal connected with your devices,typing
192.168.169.1 in the browser and press "Enter" to login,fill in user
name and password with“admin”.
●
logined and setting page as below.
●
●
Operation Mode Configuration:Menu- OpMode -choose your
network port working mode (AP Client for Wireless
amplifierport, Gateway for WLN /LAN port )
●
●
pen the Advanced in the menu-Wi-Fi Security Setup-choose
the type of encryption.
Wireless settings:Open Advanced-Wi-Fi Basic setup you can
add/revise WIFI name as below.
●
Settings (wireless)/-WPA2-Personal (Security) in security
Mode-select our wireless encryption.
●
Open the wireless set in the menu (wireless
settings)-Security-Security mode-WPA2-Personal pass phrase
(Set up password). Note:you have to choose 1 term WPA
Algorithms available, click “Apply” to start :
settings)-Security-Security mode-WPA2-Personal pass phrase
(Set up password). Note:you have to choose 1 term WPA
Algorithms available, click “Apply” to start :
●
Open the wireless set in the menu (Tools)-Admin Here can be
set up the administrator login account and password.
●
Open “Internet settings” - “WAN settings” PPPOE(ADSL)
dial-up:
●
Open Home - OpMode SelectingAP Client .
●
Open the(Advanced) Selecting AP-Client Configuration Setup
Pass phrase ( Set up password).
Note:you have to enterpasswordclick “Apply” to start:
Wi-Fi Password modification instructions
Administrator account password modification
Plugin and use
Wireless signal amplifier instructions
Wi-Fi Dialing instructions
WIFI Name/Network Name SSID: OTRAVEL-****
SL-190