Guangzhou City Cun Mu International Trade Co. Ltd WXCV02 用户手册
Instruction Manual
WXCV01 Wireless Bac
kup Camera
Our KENNA Wireless Backup Cam (Model: WXCV01) package includes a backup
camera and a vehicle display. When using, turn on the switch of the on-board charging plug
of the display, so that the backup-camera will transmit a wireless live-video signal to the
monitor in the car. Then, the image of the rear of the car will be successfully displayed on
your screen.
of the display, so that the backup-camera will transmit a wireless live-video signal to the
monitor in the car. Then, the image of the rear of the car will be successfully displayed on
your screen.
When the battery power is less than 5%, the LED indicator light on the right side of
the backup camera will show red. At this time, take out the charger (included in the package)
and plug it into the charging plug located on the right side of the backup camera. Then, the
LED light will be on blue color after the charging plug is inserted. The light is gone when the
charging is completed.
and plug it into the charging plug located on the right side of the backup camera. Then, the
LED light will be on blue color after the charging plug is inserted. The light is gone when the
charging is completed.
PACKAGE INCLUDES:
1x Wireless Backup Camera (12.7in x 6.9in x 1.6in)
1x 4.3” Monitor (5.1in x 4.5in x 0.8in)
1x 13ft USB Charging Cable
1x 5V 2A Power Adapter
2x License Plate Self-Tapping Screw
4x License Plate Machine Screw
1x Instruction Manual
1x Quick Install Guide
1x 4.3” Monitor (5.1in x 4.5in x 0.8in)
1x 13ft USB Charging Cable
1x 5V 2A Power Adapter
2x License Plate Self-Tapping Screw
4x License Plate Machine Screw
1x Instruction Manual
1x Quick Install Guide
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.