TCL Entertainment Solutions Limited TS5000 用户手册
- 9 -
Use the AUX Socket
A. Use a RCA to 3.5mm audio cable (not
included) to connect the TV’s audio output
sockets to the AUX socket on the unit.
sockets to the AUX socket on the unit.
B. Use a 3.5mm to 3.5mm audio cable
(included) to connect the TV’s or external
audio device headphone socket to the AUX
socket on the unit.
audio device headphone socket to the AUX
socket on the unit.
Connect to Power
Risk of product damage!
- Before connecting the AC power cord,
- Before connecting the AC power cord,
ensure you have completed all other
connections.
connections.
- Ensure that the power supply voltage
corresponds to the voltage printed on
the back or the underside of the unit.
the back or the underside of the unit.
Soundbar
• Connect the mains cable to the AC~
• Connect the mains cable to the AC~
Socket of the unit and then into a mains
socket.
socket.
Subwoofer
• Connect the mains cable to the AC~
• Connect the mains cable to the AC~
Socket of the subwoofer and then into
a mains socket.
a mains socket.
Pairing the Wireless Subwoofer with the Main Unit
Automatic pairing
The subwoofer and soundbar will automatically pair when both units are plugged into the mains
sockets and turned on. No cable is needed for connecting the two units.
- When the subwoofer is pairing with the main unit, the Pair Indicator will flash fash.
- When the subwoofer is paired with the main unit, the Pair Indicator will light up.
NOTE:
- Do not press the Pair button on the rear of the subwoofer, except for manual pairing.
- If the automatic pairing fails, pair the subwoofer with the main unit manually.
sockets and turned on. No cable is needed for connecting the two units.
- When the subwoofer is pairing with the main unit, the Pair Indicator will flash fash.
- When the subwoofer is paired with the main unit, the Pair Indicator will light up.
NOTE:
- Do not press the Pair button on the rear of the subwoofer, except for manual pairing.
- If the automatic pairing fails, pair the subwoofer with the main unit manually.
Manual pairing
1. Ensure that all the cables are well connected and the main unit is in Standby mode.
2. Press and hold the Pair button on the rear of the subwoofer for a few seconds. The subwoofer will
2. Press and hold the Pair button on the rear of the subwoofer for a few seconds. The subwoofer will
enter the pairing mode and the Pair Indicator will blink quickly.
3. Press the
button on the main unit or on the remote control to switch the main unit on.
4. After the wireless connection succeeded, the Pair Indicator will light up.
5. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer
5. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer
and then reconnect the main cable after 3 minutes. Repeat step 1 ~ 4.
.KGJVNUTK
';>
PAIR