KZ Broadband Technologies Ltd. AM4000D12 用户手册
Page 14
configuration and make sure the DHCP is enabled.
To release and renew the correct IP address, please unplug the Ethernet cable from PC and
wait for about 5 seconds, then connect it again.
If the problem persists, please contact the operator or distributor for further diagnose.
3) My CPE networking is not working properly.
You may want to check if the LTE connection is up and running properly. You can do this by
login the WEB GUI and check the LTE Interface Info page.
You may want to perform a factory reset and see if the problem is being corrected. You can do
this by log into the WEB GUI perform restore the unit to default factory setting.
If the problem cannot be corrected by factory reset, please contact the operator or distributor
for further diagnose.
4) I forget the login password and like to reset the unit to factory default.
Please contact the operator or distributor and give them the IMEI number of the unit. The
operator or distributor can issue you a RESET password for you to enter in the WEB login
window.
After the unit is reset to factory default, you can login using the default password.