KZ Broadband Technologies Ltd. AM4000DB41 用户手册

Page 5 

 

 

Upon receiving the product, please unpack the product package carefully. Each product is shipped 
with the following items:  

 
 

ODU unit 

1 

Power adapter 

1 

Power Line 

1 

Mounting brackets 

1 

PC Ethernet Cable 

1 

If you find any of the items missed, please contact our local distributor immediately. 
 

CPE Unit：

Please unpack the package and check the units as following list. 

 

  Device logic connection 

For outdoor CPE product, it is suggested that the CPE device be installed in a shaded area to 
avoid direct sun light exposure which may cause over heat in certain extreme weather condition. 
The CPE should be properly grounded for proper protection against lighting or power surge. 
To power on the device, the outdoor CPE must uses a 24V PoE integrated DC power supply 
adapter. The power adapters can operate in 90-250V AC range and therefore can be used in 
different country. Once the device is powered up, the user should wait for about 2 minutes before 
the device becomes operational. For CPE with the RUN LED indicator, a slowly flashing light 
indicates the system has completed the startup procedure.   
To connect PC, LAN switch or other type of IP device to the CPE product, the user should use 
standard CAT5 Ethernet cable and connect to the appropriate LAN port. Once connect the CPE 
LAN LED indicator should come on.