KZ Broadband Technologies Ltd. AM4000MHGW 用户手册
Page 5
CPE Unit:
Unpacking the Equipment Table 2-1 lists all the standard parts that are supplied in your LTE CPE Unit
Installation Package. Please take the time to unpack the package and check its contents against this list.
Installation Package. Please take the time to unpack the package and check its contents against this list.
2.2 Installing the Equipment
Device logic connection
AM4000M is user-friendly and easy to setup. To power on the IDU device, the IDU must uses a 24V
DC power supply adapter. The power adapters can operate in 90-250V AC range and therefore can be
used in different countries. Once the IDU device is powered up, the user should wait for about 2
minutes before the device becomes operational.
DC power supply adapter. The power adapters can operate in 90-250V AC range and therefore can be
used in different countries. Once the IDU device is powered up, the user should wait for about 2
minutes before the device becomes operational.
To connect PC, LAN switch or other type of IP device to the product, the user should use standard
CAT5 Ethernet cable and connect to the appropriate LAN port of the IDU. Once connect the CPE
LAN LED indicator should come on.
CAT5 Ethernet cable and connect to the appropriate LAN port of the IDU. Once connect the CPE
LAN LED indicator should come on.
To use the phone service, user can simply plug the phone line to the CPE RJ11 port in the back. If the
line is not registered or configured, a fast busy tone will be provided and the corresponding LINE
LED light will be off.
line is not registered or configured, a fast busy tone will be provided and the corresponding LINE
LED light will be off.