Certis Technology International Pte Ltd CEK9PROXRDR 用户手册
Mini 8000 Series Proximity Reader Installation Manual
Parts
o
1 - Certis reader
o
1 - Installation manual
o
2 - 0.75” self tapping screws
Required Tools
o
Up to 8 wire splices (pigtail)
o
Cable, 5-9 conductor (Weigand or RS232), 24 AWG FT4 (pigtail)
o
Linear DC power supply
o
Gang box (optional)
o
Security tool for anti tamper screw
Mounting
1. Fasten the metal base plate to the wall with two
screws to the wall or gang box (optional)
(gang
box not included).
2. Clip the top edge of the cover
, followed by the
bottom edge of the reader.
3. Secure the reader to the base plate by fastening the
security screw at the base of the reader
.
Installation is completed.
Specifications
Input voltage
(Reader end)
(Reader end)
DC10V~15V
Average read range
> 5cm
Operating current
160mA (max)
Maximum cable length
150m
Operating
temperature
temperature
-30ºC~70 ºC
Recommendations
1. Linear DC Power Supply
2. 22AWG shielded cable; “One-point” ground recommended (refer to diagram)
Wiring
Color
Label
Description (Default for SpeedGuard)
Red
+12V dc
Power Supply to reader,VR1,VR2…VR4
Black
GND
Signal GND
Green
Data0
Wiegand Output data, I1D0,I2D0…I4D0
White
Data1
Wiegand Output data, I1D1,I2D1…I4D1
Yellow
No Use
No use
Blue
LED
LED control, LED1,LED2…LED4
Brown
Buzzer
Buzzer input, active low ,Buz1,Buz2…Buz4
Orange
Tamper
Tamper output (open collector, Active low, max 100mA)
V2.6