Orion Electric Co Ltd M2H6A 用户手册

NOTE:
It is no problem to omit the proce-
dures for confirming the scene or
adjusting start and end points.

6

Press 

 or 

 to select “SET END” at the end point of the scene

you want to erase and press ENTER.
The still image at the end point appears at the right small screen.

5

Press 

 or 

 to select “SET START” at the start point of the

scene that you want to erase and press ENTER. (To set the start
point easily, search the start point while “SET START” is selected)
The still image at the start point appears at the left small screen.

7

Check the erased scenes.
•  Select “Preview” and press ENTER. Then the video where the

scenes between the start and end points are erased is played
back.

•  Each operation button (F.FWD, REW, SKIP +, SKIP –, PLAY,

PAUSE/STILL) for playback also can be used.

8

Adjust the start and end points.
•  To adjust the start point, select “Adjust start” and press ENTER.

You can change the start point every one second by pressing

or

.

•  To adjust the end point, select “Adjust end” and press ENTER.

You can change the end point in the same way as the start point.

9

If you determine the scene to be erased, press 

 or 

 to select

“Finish” and press ENTER.
• A chapter mark is automatically added at the location of the

erased scene.

 2H6P001A[E] P61-69

6/28/05, 5:37 PM

65