Orion Electric Co Ltd M2I3A 用户手册
36
Recording (VCR)
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
Press
once
twice
3 times
4 times
5 times
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
6:00
NORMAL REC
Recording time Press
6 times
7 times
8 times
9 times
10 times
Recording time
Load a cassette tape with the erase
prevention tab intact.
prevention tab intact.
The VCR will automatically turn on.
1
Press SP/SLP to select the desired tape speed
SP or SLP.
SP or SLP.
The tape counter and “SP” or “SLP”
will appear on the screen for about 4
seconds.
will appear on the screen for about 4
seconds.
2
Set “TV” or “CABLE” option to the
appropriate position
appropriate position
27
.
3
00 : 00 : 00 SP
+0
CH 110
INDEX
OTR 0 : 30
TV
- VHF/UHF channels
CABLE
- Cable TV channels
Press Direct channel selection buttons (0–9) or
CH +/– to select the channel to be recorded.
CH +/– to select the channel to be recorded.
4
Press REC/OTR. Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
button again to stop recording after 30 minutes.
Each additional press of REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
5
To cancel OTR
Press STOP or turn off the power.
“ ” will appear on the screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press VCR DVD selector to change to DVD mode and
perform the DVD playback
If you wish to watch the DVD playback during OTR or standard
recording, press VCR DVD selector to change to DVD mode and
perform the DVD playback
42
.
0–9
CH +/–
REC/OTR
SP/SLP
SP/SLP
VCR DVD
STOP
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
The OTR and recording time will
appear on the screen for about 4
seconds, then change to “ ”.
appear on the screen for about 4
seconds, then change to “ ”.
2I30101A-En_p32-37
11/25/05, 16:32
36