EnGenius Technologies EAP350 用户手册
35
8 Management
8.1 Administration
This page allows you to change the EAP350 username
and password. By default, the user name is admin and
the password is: admin. Password can contain 0 to 12
alphanumeric characters and is case sensitive.
and password. By default, the user name is admin and
the password is: admin. Password can contain 0 to 12
alphanumeric characters and is case sensitive.
New Name: Enter a
new
username for logging in to the Web
Configuration.
New Password: Enter a new password for logging in to the
Web Configuration.
Confirm Password: Re-enter the new password for
New Password: Enter a new password for logging in to the
Web Configuration.
Confirm Password: Re-enter the new password for
confirmation
.
Save/Apply / Cancel: Click Save/Apply to
apply
the changes
or Cancel to return previous settings.
Logout: Click Logout to
Logout: Click Logout to
logout
8.2 Management VLAN
This page allows you to assign a VLAN tag to the packets.
A VLAN is a group of computers on a network whose
software has been configured so that they behave as if
they were on a separate Local Area Network (LAN).
Computers on VLAN do not have to be physically located
next to one another on the LAN.
A VLAN is a group of computers on a network whose
software has been configured so that they behave as if
they were on a separate Local Area Network (LAN).
Computers on VLAN do not have to be physically located
next to one another on the LAN.
Management VLAN ID: If your network includes VLANs and if
tagged packets need to pass through the Access Point, enter
the VLAN ID. Otherwise, click No VLAN tag.
Accept / Cancel: Click Accept to confirm the changes or
Cancel to cancel and return previous settings.
tagged packets need to pass through the Access Point, enter
the VLAN ID. Otherwise, click No VLAN tag.
Accept / Cancel: Click Accept to confirm the changes or
Cancel to cancel and return previous settings.
Note:
1. If you reconfigure the Management VLAN ID, you may lose your
connection to the EAP350. Verify that the DHCP server supports the
reconfigured VLAN ID and then reconnect to the EAP350 using the
new IP address.
2. Clicking Accept does not apply the changes. To apply them, use
Status > Save/Load (see section 5.1).
connection to the EAP350. Verify that the DHCP server supports the
reconfigured VLAN ID and then reconnect to the EAP350 using the
new IP address.
2. Clicking Accept does not apply the changes. To apply them, use
Status > Save/Load (see section 5.1).