EnGenius Technologies EAP350 用户手册
41
CLI: Select ON or OFF to enable or disable the ability to
modify the EAP350 via a command line
modify the EAP350 via a command line
interface
(CLI).
Save/Apply / Cancel: Click Save/Apply to
apply
the changes
or Cancel to return previous settings.
8.9 Log
Display a list of events that are triggered on the EAP350
Ethernet and wireless interfaces. You can consult this log
if an unknown error occurs on the system or when a
report needs to be sent to the technical support
department for debugging purposes.
Ethernet and wireless interfaces. You can consult this log
if an unknown error occurs on the system or when a
report needs to be sent to the technical support
department for debugging purposes.
Syslog: Enable or disable the syslog
function
.
Log Server IP Address: Enter the IP address of the log server.
Local Log: Enable or
disable
the local log service.
Save/Apply / Cancel: Click Save/Apply to apply the changes
or Cancel to return previous settings.
or Cancel to return previous settings.
8.10 Diagnostics
The diagnostics feature allows the administrator to verify
that another device is available on the network and is
accepting request packets. If get ping packet response, it
means a device is on line. This feature does not work if
the target device is behind a firewall or has security
software installed.
that another device is available on the network and is
accepting request packets. If get ping packet response, it
means a device is on line. This feature does not work if
the target device is behind a firewall or has security
software installed.
Target IP: Enter the IP address you would like to search.