NEC Corporation of America KMP6J1L1 用户手册
2
Inserting a SIM card
☛
Release the battery lock in the direction of arrow ➀, and then lift the battery up in the direction of arrow ➁ to remove it.
☛
Place the straight end of SIM card with the metal part facing down.
☛
Carefully move to slide the SIM card lock in the direction of arrow ➂ and push the SIM card in the direction of arrow ➃ to place the SIM card under the lock.
.
,
Never pull the SIM card lock upward. Doing so may break the lock.
,
If the SIM card is not fully inserted when the battery is replaced, damage to the SIM card can occur.
/
If the SIM card is already fitted, see “Start-up” on page 3.
Removing a SIM card
☛
With the battery removed and lightly holding down the SIM card, slide the SIM card lock in the direction of arrow ➂ and remove the SIM card.
2
The SIM card may pop out when you release the SIM card lock. Be careful not to drop it.
Charging the battery
Before trying to use your phone, insert the phone’s battery, connect the NEC battery charger (AC adapter) supplied with
your phone to a suitable mains power socket and then connect the charger’s output to the phone’s charger connector.
☛
Connect the charger plug (AC adapter) into the connector at the side of the phone. If your phone is turned on, a
message will be displayed on the 2nd-LCD. LED will turn on in red while charging. When charging is complete, the
LED will turn off.
2
You are recommended to switch off the phone while charging. If you need to receive calls, your phone can be
switched on and left in standby while being charged, although the total time taken to charge is then increased.
2
3
4
1
SIM card lock
SIM card
LED
Charger connector