Motorola Solutions Inc. 89FT7632 用户手册
Figure 2: Access Point (AP)
Figure 3: AP, radio only
The PMP 320 AP uses 802.16e
n to the SMs or CPE and is
802.16e PHY and MAC compliant. It com
WiMAX Wave2 profile, except for
mobility.
The AP uses a custom 56 VD
The AP uses a custom 56 VD
tem
were
4. The AP uses
less than 25
s than 100 watts for 360° coverage. The AP includes
integrated surge suppression that is the equivalent of the 600SS surge suppressor
recommend
recommend
tal
The AP func
rk, with routes to the SMs auto‐configured. It
supports a c
le stat
nd the standard RIPv2 routing protocol.
The AP supp
d A
The AP can
igured to
address from a network DHCP server, or
be manually assigned its IP a
The AP can
The AP can
requests either by relaying the
requests to a network DHCP
rver itself.
The AP can be configured ei
uthorization,
and Accounting) server, or u
red to use
an external
r, the
AAA server for
authenticat
nd serves as a RADIUS client communicating with the AAA
server for authorization of SM services.
The AP has
The AP has
ed we
r for configuring using a web browser.
The AP supp
MP v1 and v2c, and uses standard 802.16e MIBs (Management
Information
as
Specification
320
for the over‐the‐air connectio
plies with
C power sys
, typically po
d by a CMM
W per AP, or le s
ed for SM ins
lations.
tions as a router in the netwo
onfigurab
orts ICMP an
be conf
ic routing table a
RP.
either receive its IP
ddress.
be configured to respond to SM DHCP
server, or function as a DHCP se
ther to use an external AAA (Authentication, A
se a minimal internal AAA server. When configu
AAA serve
ion requests, a
AP serves as a relay between SMs and the
an embedd
orts SN
b serve
Base) as well
s for the CAP
the Motorola 802.16e AP MIB.
are listed in
Table 1
.
12