Motorola Solutions Inc. 99FT4026 用户手册

After the MOTOTRBO Repeater has been mechanically installed and all electrical connections have 
been made, power may now be applied and the repeater checked for proper operation.

Before applying power to the repeater, make sure all boards are securely seated in the appropriate 
connectors on the backplane and that all RF cables are securely connected.

Turn ON the circuit breaker controlling the AC outlet that is supplying power to the repeater Power 
Supply Module.

Operation of the repeater can be verified by:

• observing the state of the 8 LEDs located on the front panel, and
• exercising radio operation.

After turning ON the repeater power (or after a repeater reset), the 8 LEDs on the repeater front 
panel:

• are all lit for about one second to indicate that they are functional.
• go off for one second.
• now indicate operational status of the repeater.

Backup the repeater's codeplug data by using the Customer Programming Software (CPS) on a 
computer.

Some repeater components can become extremely hot during operation. Turn 
off all power to the repeater, and wait until sufficiently cool before touching the 
repeater.