Motorola Solutions Inc. 99FT5013 用户手册

Press the programmed One Touch Call button to make a 
Call Alert to the predefined alias or ID.

The display shows Call Alert: <Subscriber Alias or 
ID>, indicating that the Call Alert has been sent. 

The LED lights up solid green when your radio is sending 
the Call Alert.

If the Call Alert acknowledgment is received, a tone sounds 
and the display shows Call Alert Successful.
OR
If the Call Alert acknowledgment is not received, a tone 
sounds and the display shows Call Alert Failed.

NOTE: This is a trunking only feature.

The Emergency feature is used to indicate a critical situation. 
You are able to initiate an Emergency at any time on any screen 
display even when there is activity on the current channel.

Your radio supports the following Emergency modes:

Emergency Call

Emergency Alarm

Emergency Alarm with Call

Emergency Alarm with Voice to Follow

In addition, each mode has the following types:

Regular 

 Radio transmits an alarm signal and shows audio 

and/or visual indicators.

Silent 

 Radio transmits an alarm signal without any audio or 

visual indicators. There will be no response (call) from the 

target radio until you press the PTT button to initiate the call.

Silent with Voice – Radio transmits an alarm signal and is 
able to receive an incoming call, without any audio or visual 

indicators, until you press the PTT button to initiate, or 

respond to, the call.

Only ONE of the Emergency modes above can be assigned to 
the programmed Emergency button.