Clarity A Division of Plantronics Inc. CL40IHT02 用户手册

 

3

 
INITIAL SET-UP 
 
 
Note:    Before using your cordless telephone, unit must be charged for at least 12 hours. 
 
              TONE / PULSE (P/T) MODE: 

 
A.  If your home is equipped with a Tone dialing system, set the Tone/Pulse select switch to the 

Tone position. 

B.  If you have a rotary dialing system, set the Tone/Pulse select switch to Pulse position. 
C.  If you are unsure which system you have, set the Tone/Pulse select switch to the Tone 

position. Press the TALK button on the Handset to get a dial tone, and press any key on the 
keypad except zero. If the dial tone continues, it means that you do not have Touchtone 
dialing service. Press the TALK button on the Handset to hang up. Set the Tone/Pulse select 
switch to the Pulse mode and then try again. 

 
SETTING THE HANDSET RINGER ON/OFF 
The Handset ringer must be set to “RING HI ” position in order to receive an incoming calls. 
See Functions Operation section on page 11. 

 
TELEPHONE OPERATION: 
 
 

 

To receive a call, Handset must be programmed to “RING HI ” position. 

     

See Functions Operation section on page 11. 

 

 

 

1.      Since the unit is “Auto Answer” simply pick up the Handset from the Base cradle when the  
         phone rings.  

2. 

Start your conversation. The LCD display will show the call timer counting. 

3. 

To amplify in-coming sound, press the AMP button slide the Volume control to suit your 
hearing. 

4. 

Slide the Tone Control switch up/down to attain optimum word clarity. 

5. 

To end your conversation either press the TALK button or place the Handset back on the 
Base unit. The unit “Automatic Standby” feature is activated. 

 
B. 

 
1.      When the phone rings, press the TALK button on the Handset , simultaneously the 
          In Use LED  indicator will light up. 
2. 

Start your conversation. The LCD display will show the call timer counting. 

3. 

To amplify in-coming sound, press the AMP button, slide the volume control to suit your 
hearing. 

4. 

Slide the Tone Control switch up or down to attain optimum word clarity. 

5. 

To end your conversation, either press the TALK button or place the Handset back on the 
Base unit. The unit “Automatic Standby” feature is activated. 

 

 PLACING CALLS: 
 
              A.     USING THE HANDSET UNIT: 
 

1. 

Dial the telephone number you want to call. 

2. 

Press the TALK button, then start conversation. 

3. 

To end the conversation, press the TALK button or place the Handset back on the Base unit. 

 
LAST NUMBER REDIAL: 
If you get busy tone, use the REDIAL function to automatically dial the last telephone number you  
called.