Furuno USA Inc 9ZWFM3000 用户手册
9
2.Basic Operation
2.5 Optional Voice Scrambler Operation
2.5.1 Activating the Scrambler
The optional Voice scrambler provides private communica-
tions. In order to receive or send scrambled transmissions
you must first activate the Scrambler function. To activate the
function, an optional FM-3030 is necessary. See p. 40 for set-
ting the scrambler unit. Ask your dealer for details.
tions. In order to receive or send scrambled transmissions
you must first activate the Scrambler function. To activate the
function, an optional FM-3030 is necessary. See p. 40 for set-
ting the scrambler unit. Ask your dealer for details.
Note:
The Scrambler function automatically turns OFF when
Channel 16 or 70 is selected.
q Select an operating channel other than Channel 16 or 70.
w While pushing [HI/LO], push [LO/DX] (
w While pushing [HI/LO], push [LO/DX] (
) to turn
the optional Scrambler function ON.
• “SC” appears.
e To turn the Scrambler function OFF, repeat step w.
• “SC” disappears.
2.5.2 Programming scrambler codes
There are 32 codes (1 to 32) available for programming when
the optional FM-3030 is installed. In order to understand one
another, all transceivers in your group must have the same
scramble code. This function may not be available depend-
ing on dealer setting.
the optional FM-3030 is installed. In order to understand one
another, all transceivers in your group must have the same
scramble code. This function may not be available depend-
ing on dealer setting.
q Turn power OFF.
w While pushing [16] ( ), turn power ON to enter Set mode.
e After the display appears, release [16] ( ).
r Push [16] ( ) one or more times to select the scrambler
w While pushing [16] ( ), turn power ON to enter Set mode.
e After the display appears, release [16] ( ).
r Push [16] ( ) one or more times to select the scrambler
code.
• “Scrambler Code” appears.
t Rotate [CHANNEL] to select the desired scrambler code.
y Turn power OFF, then ON again to exit Set mode.
y Turn power OFF, then ON again to exit Set mode.
9
9
9
SCR
IC
Set Mode
Beep
Set Mode
Scrambler
Code
Code
Set Mode
Scrambler
Code
Code
Enter Set mode
Turn OFF
+
Select code
Push one or
more times.
more times.
Set mode
Scrambler code item
[Example]: Programming scrambler code 8.