Furuno USA Inc 9ZWFM3000 用户手册

20

5.DSC Operation

The Individual call function allows you to transmit a DSC sig-
nal to a specific ship only.

q Push [DSC/ENT] to enter the DSC menu.
w Rotate  [CHANNEL] to select “Individual,” push

[DSC/ENT].

e Rotate [CHANNEL] to select the desired pre-programmed

individual address or “Manual 

Input,” push

[DSC/ENT].

• The ID code for the Individual call can be set in advance. (p. 13)
• When “Manual  Input” is selected, set the 9-digit ID code

(1st digit must not be ‘0’) for the individual you wish to call by
using [CHANNEL].

- Push [CH/WX] or [SCAN] for cursor movement.
- After 9-digit is input, push [DSC/ENT] to set the ID code.

r Rotate [CHANNEL] to select a desired intership channel

or “Manual Input,” push [DSC/ENT].

• When “Manual Input” is selected, rotate [CHANNEL] to se-

lect the desired channel other than Channel 70, push [DSC/ENT].

t Push [DSC/ENT] to transmit the Individual call.

• If Channel 70 is busy, the transceiver stands by until the channel

becomes clear.

To Call,

To Cancel
[other]

[DSC/ENT]

Individual

To Cancel
[other]

Ch70 is BUSY

Push [DSC/ENT] to transmit DSC call.

When Ch 70 is busy.

Sel Channel

 69

˘08

 77

Sel Address

 Ricky

 Manual Set

˘Tom

˘Individual

 POS Input

 Group

Sel Item