Furuno USA Inc 9ZWRTR113 用户手册
1. INSTALLATION AND WIRING
11
3. Wrap the junction of the connectors with self-vulcanizing tape and vinyl tape (local
supply) for waterproofing as follows:
4. As shown in the figure below, secure the ground wire from the ship's ground (IV-
2sq, local supply) and ground wire from the antenna unit, using the terminal screw
(M4x10) that is pre-attached to the cable cover.
(M4x10) that is pre-attached to the cable cover.
5. Apply silicone rubber to the ground terminal after fastening the terminal screw.
Self-vulcanizing tape
1) Wrap the junction of the connectors
with one layer of self-vulcanizing
tape.
tape.
2) Change wrap direction and wrap
one layer of the self-vulcanizing
tape again.
tape again.
Self-vulcanizing tape
3) Wrap one layer of the vinyl tape over
the self-vulcanizing tape.
Vinyl tape
4) Change wrap direction and wrap one
layer of the vinyl tape again.
Vinyl tape
Ground wire from
the ship’s ground
the ship’s ground
*: Pre-attached to the cable cover.
Ground wire* from
the antenna unit
the antenna unit
Cable cover
Terminal screw*
Silicone rubber