General Research of Electronics Inc 0716 用户手册

The SWPR menu is used when creating new Spectrum Sweeper
objects, or editing existing Spectrum Sweeper objects. All menus
are shown in the scanners display as a three line window that 
can be scrolled up or down to access the various different
parameters. The active parameter is always the middle 
parameter and is indicated by a flashing “:”. The entire SWPR 
menu is shown below:

Scan Lists

Type

Sub-bands

Tag

L/Out

LED Mode

On or Off for Scan Lists 

1-20

Sets membership in Scan Lists. Use 

 keys to 

scroll through Scan Lists. Use 

SEL

 key to toggle 

Scan List membership. A “

*

” next to the Scan List 

number indicates that the object is mapped to that 
Scan List. 

All Bands or Pub Safety

Use

 to select All Bands or Public Safety. All

Bands covers the entire frequency range of the 
scanner. Public Safety covers frequency ranges 
commonly used for public safety communications.

, SEL

Sub bands are available when using SWPR in All
Bands or Public Safety mode. In All Bands, the 
sub bands are defined as follows:

0: 25-54 MHz

1: 108-137 MHz

2: 137-174 MHz

3: 216-300 MHz

4: 300-406 MHz

5: 406-470 MHz

6: 470-512 MHz

7: 764-806 MHz

8: 806-869 MHz

9: 896-1300 MHz

In Public Safety, the sub bands are defined as 
follows:

0: 33.4-46.5 MHz

1: 151-170 MHz

2: 453-467 MHz

3: 764-806 MHz

4: 851-869 MHz 

Alpha-numeric text

The alphanumeric display name for the SWPR 
object. Use the standard text entry method or 
QTXT to name the object.

On or Off

Permanent lockout for the SWPR search. Also
accessed by pressing 

FUNC L/OUT

 while the 

scanner is stopped on the SWPR object.

Solid or Flash

Controls whether the ALERT LED flashes or 
remains on solid when the ALERT LED is used.

0716 User Manual

Page 111