General Research of Electronics Inc 0716 用户手册

object using the 5-way pushbutton pad. Press 

FUNC

, then 

L/OUT

to remove permanent lockout from the talkgroup. Press 

FUNC

,

then

CLR

 to delete the TGRP object from the scanner. Press the 

EDIT, then the CURR softkey to edit and save the TGRP object.

By default, your scanner will store all new objects, and objects 
found during Search, Tune, and Sweeper as mapped to Scan 
List 01. 

You can easily change the default Scan List to any Scan List you 
specify, including the special FAV and SKYWARN Scan Lists. 

Press

PGM

, then the GLOB softkey, and use the 

 key to scroll 

down until the Dflt ScanList item appears in the middle of 
the display. Enter a new Scan List number to use as the default 
Scan List. The following numbers are valid:

0:

The “not scanned” (ns) Scan List - objects that have no 

Scan List mappings can be found here

1-20: The twenty normal Scan Lists

21:

The FAV Scan List

22:

The SKYWARN Scan List.

Press

ENT

 or the Done softkey to store your new default Scan 

List value, then press the SAVE softkey to save your changes to 
the radios configuration memory.

Objects that you no longer need to use can easily be deleted 
from the 0716's memory, making room for new objects.

To delete an object, press 

PGM

, then use the 

 keys to 

navigate to the object you wish to delete. Press 

FUNC CLR

 to 

delete the object. The scanner will ask you to confirm the delete 
command before removing the object from the scanners
memory. Deletions cannot be un-done. 

To delete a TSYS, use the FIND feature to search for the TSYS
by name. Press 

PGM

, then press the EDIT softkey, then press 

the FIND softkey, and use the Standard Text Entry Method to 
enter all or part of the TSYS name you wish to delete. Press the 
OK softkey to begin searching, and, if necessary, press the NEXT
softkey to continue searching until the desired TSYS is located. 

0716 User Manual

Page 64