General Research of Electronics Inc 0716 用户手册
to toggle Hit Counts on and off. When finished, press the
SAVE softkey to save your changes to the radios configuration
memory.
SAVE softkey to save your changes to the radios configuration
memory.
You can view the hit counts for an object by navigating to the
object by pressing
object by pressing
PGM
, then using the
keys to
navigate to the desired object, if necessary. Once you have
selected the desired object, press the EDIT softkey, then the
CURR softkey, and scroll to the Hit Count item bottom of the
object menu to view the hit counter.
selected the desired object, press the EDIT softkey, then the
CURR softkey, and scroll to the Hit Count item bottom of the
object menu to view the hit counter.
To reset the hit counter for a single object, press the Dflt
softkey while the Hit Count item is selected in the objects
menu.
softkey while the Hit Count item is selected in the objects
menu.
To clear all hit counters, press the
PGM
key, then the GLOB
softkey. Use the
key to scroll down to the Clear Hits item,
then press the
SEL
key. Press the SAVE softkey to save your
changes and exit the Global settings menu.
Audible Alarms and the ALERT LED
Your 0716 features a very powerful ALERT LED with Audible
Alarm capability that allows you to set different types of visual
and audible notifications for the different types of objects you
create.
Alarm capability that allows you to set different types of visual
and audible notifications for the different types of objects you
create.
You may have noticed that the menus for each object you create
include various settings for LED, Backlight and Alarm. You can
use these settings to design custom visual and/or audible alarms
that are triggered when activity is detected on the specified
Scannable Object.
include various settings for LED, Backlight and Alarm. You can
use these settings to design custom visual and/or audible alarms
that are triggered when activity is detected on the specified
Scannable Object.
NOTE:
The Alert LED utilizes a special tri-color Light Emitting Diode module
that mixes light from red, green and blue LED elements to produce
thousands of different colors. Eight pre-defined color settings are
available for use in object menus.
that mixes light from red, green and blue LED elements to produce
thousands of different colors. Eight pre-defined color settings are
available for use in object menus.
LED COLOR: 0
is normally used
for “all colors off”, or no Alert LED display.
NOTE:
Slight variations to LED colors are a normal part of the
manufacturing process. You may notice these variations when using
the White LED color setting (
manufacturing process. You may notice these variations when using
the White LED color setting (
LED COLOR: 0
), or when comparing
one
071
6 to another. You can compensate for these slight
variations by fine-tuning the RGB LED settings for each color. See
the COLOR settings in the GLOB menu in Detailed Menu Reference
section at the end of this manual.
the COLOR settings in the GLOB menu in Detailed Menu Reference
section at the end of this manual.
Audible Alarm and ALERT LED Settings
0716 User Manual
Page 69