SANYO Electric Co. Ltd. PBS-CS82 用户手册
10
Connection of the power cable (2)
6) Feazings processing of the core line.
\
Push the upper part of the connector with a
finger, and insert a core wire. (figure)
finger, and insert a core wire. (figure)
\
L (Loading), N (Neutral), FG (Frame Ground).
7) Combine the copper shield to the position
“FIX” of Photo 5.
And tighten the cable
gland firmly.
\
[Caution]When the fixation of the terminal
block’s lid is imperfect, it is feared that this
CS gives hindrance to other electric devices.
block’s lid is imperfect, it is feared that this
CS gives hindrance to other electric devices.
8) Form core wires that are inserted into the
power supply terminal.
9) The tightening of the dome nut must be
done by hand without fail and tighten it
strongly.
strongly.
10) Wind the self-bonding tape between the
surface of dome nut and the end of cable.
(figure)
N:White
FG:Red
L:Black
Fix
Forming
(photo5)