SANYO Electric Co. Ltd. SCP-4930 用户手册

下载
页码 77
Using Your Phone’s Battery and Charger
Battery Capacity
Your PCS Phone is equipped with a Lithium Ion (LiIon) battery. It allows you to
recharge your battery before it is fully drained. The battery provides up to xx hours of
continuous digital talk time (up to xx hours in analog) or up to xx days of continuous
digital standby time (up to xx days in analog).
When the battery level is only 5 minutes of talk time remain, “LOW BATTERY”
notification appears. When there are approximately two minutes of talk time left, the
phone sounds an audible alert and then powers down.
Installing the Battery
To install the LiIon battery:
1. Place the battery into the space beneath the antenna with the metal contacts at
the bottom, facing downward.
2. Gently press down until it’s in place and the battery release latch snaps.
Removing the Battery
To remove your battery:
1. Make sure the power is off so that you don’t lose any stored numbers or messages.
2. Push the battery release latch up and hold the battery.
3. Pull the battery up and out at a 45-degree angle.
Charging the Battery
Your PCS Phone’s LiIon battery is rechargeable and should be charged as soon as
possible so you can begin using your phone.
Keeping track of your battery’s charge is important. If your battery level becomes too
low, your phone automatically turns off and you will lose all the information you were
currently working on. For a quick check of your phone’s battery level, glance at the
battery charge indicator located in the upper-right corner of your phone’s display
screen. If the battery charge is getting too low, the battery icon 
appears and the
phone sounds a warning tone.
Always use a approved desktop charger, travel charger, or vehicle power adapter to
charge your battery.
Warning: Using the wrong battery charger could cause damage to your phone and
void the warranty.
Tip: Be sure to watch your phone’s battery level indicator and charge the battery
before it runs out of power.
Note: Long backlight settings, searching for service, vibrate mode, and browser use
affect the battery’s talk and standby times.
11