SANYO Electric Co. Ltd. SCP-6650 用户手册
22
2. Press
OK (left softkey) to continue.
3. Select an option from the following and press MENU/OK.
•
•
End to end the call.
•
Continue(Mute) to continue the call. Your voice is muted, however you can hear the
caller’s voice from the speaker.
caller’s voice from the speaker.
•
Continue(Unmute) to continue the call. You can hear the caller’s voice and speak to the
phone to answer.
phone to answer.
Setting Any Key Answer
This feature allows you to answer incoming calls by pressing any key (except END, BACK,
softkeys, and side keys).
To activate this feature:
softkeys, and side keys).
To activate this feature:
Select MENU/OK > Settings > Others > Any Key Answer > On.
•
To deactivate this feature, select Off.
Setting the Side Key Guard
This feature enables you to lock your external keys while the phone is closed.
To activate this feature:
•
Select MENU/OK > Settings > Others > Side Key Guard > On.
•
Key Guard appears on the Sub LCD when you press any side key while the phone is
closed.
closed.
•
To deactivate this feature, select Off.
Note: This feature does not apply when the phone is open.
Setting Abbreviated Dialing
Abbreviated Dialing allows you to dial a number using the last four or five digits of the phone
number. You can use either of the following options for this feature:
•
number. You can use either of the following options for this feature:
•
Ph. Book Match allows you to retrieve any number saved in your Contacts list by entering
the last three to six digits of the number.
the last three to six digits of the number.
•
Prepend # allows you to predefine the first five- or six-digit prefix you wish to use for
abbreviated dialing, so that you can dial a number by entering only the last four or five digits
of the number.
abbreviated dialing, so that you can dial a number by entering only the last four or five digits
of the number.
To set Abbreviated Dialing:
1. Select MENU/OK > Settings > Others > Abbrev. Dial.
2. Select Ph. Book Match, and then select Enable or Disable.
3. Select Prepend, and then select Enable.
4. Select Prepend#, enter the first five- or six- digit prefix, and then select OK(left softkey).
•
To deactivate this feature, select Disable during step 3 above.
Tip: If you enter less than 5 digits, the display shows a warning message.