ICOM 268500 用户手册
5
3
BASIC OPERATION
2
3
■ Channel selection
ï
ï Channel 16
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
dualwatch and tri-watch. While standing by, you must monitor
Channel 16.
➥ Push [16•
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
dualwatch and tri-watch. While standing by, you must monitor
Channel 16.
➥ Push [16•
9
] momentarily to select channel 16.
➥ Push [CH/WX•
DUAL
] to return to the condition before select-
ing Channel 16, or push [Y]/[Z] to select operating channel.
ï
ï Channel 9 (Call channel)
Each regular channel group has a separate leisure-use call
channel. The call channel is monitored during tri-watch. The
call channels can be programmed (p. 8) and are used to store
your most often used channels in each channel group for
quick recall.
➥ Push [16•
channel. The call channel is monitored during tri-watch. The
call channels can be programmed (p. 8) and are used to store
your most often used channels in each channel group for
quick recall.
➥ Push [16•
9
] for 1 sec. to select the call channel of the se-
lected channel group.
• “
” and call channel number appear.
• Each channel group may have an independent call channel after
programming a call channel.
➥ Push [CH/WX•
DUAL
] to return to the condition before se-
lecting call channel, or push [Y]/[Z] to select an operating
channel.
channel.
for 1 sec.
Push
Push
!IC-M302_draft.qxd 03.9.1 6:02 PM Page 5 (1,1)