ICOM 325000 用户手册
58
10
OTHER FUNCTIONS
10
D Cloning using a personal computer
Data can be cloned to and from a personal computer
(Microsoft
®
Windows
®
2000/XP/Windows Vista
®
or Windows 7)
using the optional CS-R6
CLONING SOFTWARE
and the option-
al OPC-478/OPC-478UC
CLONING CABLE
. Consult the CS-R6
CLONING SOFTWARE
HELP file for details.
D Cloning error
) NOTE: DO NOT push any key on the sub-receiver during
cloning. This will cause a cloning error.
When the display appears as below, a cloning error has
occurred.
occurred.
In such a case, both receivers automatically return to the
clone standby condition and cloning must be repeated.
clone standby condition and cloning must be repeated.
N Auto power-off function
The IC-R6 can be set to automatically turn OFF after a
specified period in which no operation is performed.
specified period in which no operation is performed.
120, 90, 60, 30 minutes and OFF can be specified. The
specified period is retained even when the receiver is turned
OFF by the auto power-off function. To cancel the function,
select “OFF” in step
specified period is retained even when the receiver is turned
OFF by the auto power-off function. To cancel the function,
select “OFF” in step
e below.
qPush [SET](TS) for 1 second to enter the Set mode.
wRotate [DIAL] to select the “AP OFF” item.
• Turn the Expand set mode ON for selection. (p. 39)
[DIAL]
e While holding down [FUNC], rotate [DIAL] to select a
desired time or to turn the function OFF.
rPush [SET](TS) to exit the Set mode.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the U.S.A. and other countries.
Corporation in the U.S.A. and other countries.