ICOM 339000 用户手册
20
1
ACCESS THE REPEATER
1
A
CCESS
THE REPEA
TER
If the selected repeater name
t
in step r is displayed in “TO”
on the DR mode screen, the
destination repeater setting is
completed.
on the DR mode screen, the
destination repeater setting is
completed.
Completed
Hold down [PTT] for approxi-
q
mately 1 second to access
the repeater.
the repeater.
If you get a reply call, or “UR?”
w
appears on the LCD within 3
seconds, your signal reached
your access repeater and your
call was successfully sent from
your destination repeater.
seconds, your signal reached
your access repeater and your
call was successfully sent from
your destination repeater.
Transmitting
Now, you can make calls
to various repeaters by
changing the “TO” setting!
to various repeaters by
changing the “TO” setting!
STEP 4
Check whether you can access the re-
peater
peater
NOTE: See page 35 for status indications after a reply is
received.
received.
Go to step w
Successfully sent!