ICOM 361500 用户手册
8-7
8
FUNCTIONS FOR TRANSMIT
Split frequency operation
■
Split frequency operation allows you to transmit and
receive in the same mode on two different frequencies.
The split frequency operation is performed using 2 fre-
quencies on the main and sub readouts.
receive in the same mode on two different frequencies.
The split frequency operation is performed using 2 fre-
quencies on the main and sub readouts.
The following is an example of setting 21.290 MHz for
receiving and 21.310 MHz for transmitting.
receiving and 21.310 MHz for transmitting.
q
Set 21.290 MHz (USB) in VFO mode.
w
Push [SPLIT] momentarily, then hold down [M=S]
for 1 second.
• The quick split function is much more convenient for se-
lecting the transmit frequency. See the next section for
details.
details.
• The equalized transmit frequency and “
SPLIT
” appear
on the LCD.
• [SPLIT] indicator lights.
• “TX” appears to show the transmit frequency readout.
• “TX” appears to show the transmit frequency readout.
e
Set the transmit frequency to 21.310 MHz in one of
following ways.
➥ Rotate the main dial while holding down [XFC].
➥ Rotate the sub dial.
• The transmit frequency can be monitored while hold-
ing down [XFC] or using dualwatch.
r
Now you can receive on 21.290 MHz and transmit
on 21.310 MHz.
To change the transmit and receive frequencies, push
[CHANGE] to exchange the main and sub readouts.
[CHANGE] to exchange the main and sub readouts.
✔
CONVENIENT
• Direct shift frequency input
The shift frequency can be entered directly.
q
The shift frequency can be entered directly.
q
Push [F-INP].
w
Enter the desired shift frequency with the digit keys.
• 1 kHz to 9.999 MHz can be set.
• When you require a minus shift direction, push [•] in ad-
• When you require a minus shift direction, push [•] in ad-
vance.
e
Push [SPLIT].
• The shift frequency is input in the sub readout and the
split function is turned ON.
[Example]
To transmit on 1 kHz higher frequency:
- Push [F-INP], [1] then [SPLIT].
To transmit on 3 kHz lower frequency:
- Push [F-INP], [•], [3] then [SPLIT].
To transmit on 1 kHz higher frequency:
- Push [F-INP], [1] then [SPLIT].
To transmit on 3 kHz lower frequency:
- Push [F-INP], [•], [3] then [SPLIT].
• Split lock function
Accidentally releasing [XFC] while rotating the main
dial changes the receive frequency. To prevent this, use
both the split lock and dial lock functions to change the
transmit frequency only. The split lock function cancels
the dial lock function while holding down [XFC] during
split frequency operation.
Accidentally releasing [XFC] while rotating the main
dial changes the receive frequency. To prevent this, use
both the split lock and dial lock functions to change the
transmit frequency only. The split lock function cancels
the dial lock function while holding down [XFC] during
split frequency operation.
The dial lock’s effectiveness during split frequency
operation can be selected in the set mode for both
receive and transmit frequencies; or only the receive
frequency. (p. 12-16)
operation can be selected in the set mode for both
receive and transmit frequencies; or only the receive
frequency. (p. 12-16)
• When the split function ON
• When [XFC] is pushed
• The split frequency operation is ready
[XFC]
[M=S]
[SUB DIAL]
[CHANGE]
[SPLIT]
[MAIN DIAL]
[SPLIT] indicator
10-keys