ICOM IC-R75 用户手册
15
5
RECEIVE FUNCTIONS
■
Twin PBT operation
T h e t w i n P B T ( Pa s s b a n d Tu n i n g ) f u n c t i o n
electronically narrows the IF passband widths
to reduce interference. Moving both [TWIN PBT]
controls to the same position shifts the IF.
electronically narrows the IF passband widths
to reduce interference. Moving both [TWIN PBT]
controls to the same position shifts the IF.
Variable range depends on the filter selection. ±1.29
kHz in 15 Hz steps and ±258 kHz in 3 Hz steps are
available.
kHz in 15 Hz steps and ±258 kHz in 3 Hz steps are
available.
PBT OPERATION EXAMPLE
• [TWIN PBT] should normally be set to the center
positions when there is no interference.
• When PBT is used, the audio tone may be
changed.
• PBT may not function with some IF filter
combinations.
• Not available for FM mode.
TWIN PBT
TWIN PBT
TWIN PBT
IF center frequency
Interference Desired signal
Passband
Both controls at
center position
center position
Cutting a lower
passband
passband
Cutting both higher and
lower passbands
lower passbands
Interference
Interference
Desired signal
Passband
■
Noise blanker
The noise blanker eliminates pulse-type noise
such as from car ignitions. The noise blanker is not
available for FM mode.
such as from car ignitions. The noise blanker is not
available for FM mode.
➥
Push the [NB] switch to turn the noise blanker ON
or OFF.
• When using the noise blanker, received signals
may be distorted if they are excessively strong.
• The noise blanker function in AM mode can be
deactivated depending on set mode setting. (p.
31)
31)
[NB]