ICOM IC-R75 用户手册
9
30
SET MODE
■
Set mode description
Set mode is used for programming infrequently
changed values or conditions of functions.
changed values or conditions of functions.
D Set mode operation
q
Push [
(ANT)
SET] to enter the set mode.
w
Push [UP Y] or [Z DN] to select the desired item.
e
Set the desired condition using the tuning dial.
r
Push [
(ANT)
SET] to exit the set mode.
• RF/squelch control
The [RF/SQL] control can be set as the squelch
control (default; RF gain is fixed at maximum), the
RF gain control only (squelch is fixed as open) or
RF/squelch control.
control (default; RF gain is fixed at maximum), the
RF gain control only (squelch is fixed as open) or
RF/squelch control.
See p. 14 for details.
• Confirmation beep
A beep sounds each time a switch is pushed to
confirm it. This function can be turned OFF for silent
operation.
confirm it. This function can be turned OFF for silent
operation.
The volume level can be set in the next item.
• Beep level
This item adjusts the volume level for confirmation
beep tones from 0% to 100% in 1% steps.
beep tones from 0% to 100% in 1% steps.
• The volume level is displayed in 10% steps. ‘5’ indicates
50% volume level.
• S-meter peak hold
The peak level of the S-meter can be displayed for
0.5 sec. to confirm it easily.
0.5 sec. to confirm it easily.
• Beep level limit
This item limits the maximum volume level for
confirmation beep tones.
confirmation beep tones.