Mobile Technologies Inc. 165-00471 用户手册
SECURE PLUG™ (PATENT PENDING) USER GUIDE
10
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
www.mobiletechinc.com | T:800.426.6844
Visual Reference
System Status
Condition
Solution
LED is solid green.
Ready to Whitelist
System has an Authorization Card, but does
not have any User Keys added. Follow key
whitelist process.
not have any User Keys added. Follow key
whitelist process.
LED is flashing green.
Factory Reset
System has no whitelist or Authorization
Card. Follow key whitelist process.
Card. Follow key whitelist process.
LED is solid blue.
1. Whitelist Mode (if using
Authorization Card)
2. Overcurrent
1. System is in whitelist enrollment mode.
Follow whitelist process to add User Keys.
2. System has gone into overcurrent
protection. Unplug any product which
may be drawing too much power.
may be drawing too much power.
LED is flashing blue.
Overcurrent/Disarmed
System has gone into overcurrent protection
and user has disarmed the system. Unplug
any product which may be drawing too
much power. The system will self-heal.
and user has disarmed the system. Unplug
any product which may be drawing too
much power. The system will self-heal.
LED is flashing yellow.
1. Ready to be Armed without
MTI Connect Mesh Connected
2. Merchandising Calibration
without MTI Connect Mesh
Connected
Connected
1. Add Secure Plug unit to Mesh network.
2. System is calibrating product, wait until
successful or unsuccessful merchandising
before proceeding.
before proceeding.
LED is solid yellow.
1. Armed without MTI Connect
Mesh Connected
2. Delete Whitelist Mode (If using
Authorization Card)
1. Add Secure Plug unit to
Mesh network.
2. System is deleting whitelist. Wait until
complete.
LED STATUS INDICATORS