Shenzhen Longxin Industry Co. Ltd. 0002 用户手册
3
4
5
6
7
8
TheTM-836 Bluetooth speaker can operate in 2 different modes.
Bluetooth mode overrides all other modes .To switch to other modes when
connected via Bluetooth you must press the play/ stop button on your device.
Bluetooth mode overrides all other modes .To switch to other modes when
connected via Bluetooth you must press the play/ stop button on your device.
Mode 1: Bluetooth mode
PAIRING INSTRUCTIONS: Turn your TM-836 speaker on. You will hear a beep.
The light will blink alternately blue and red. This indicates that the TM-836 is
ready to pair.
PAIRING INSTRUCTIONS: Turn your TM-836 speaker on. You will hear a beep.
The light will blink alternately blue and red. This indicates that the TM-836 is
ready to pair.
TO PAIR TO AN ANDROID PHONE
1. Open: Settings
2 .Open:wireless and network
3. Open: Bluetooth Settings
4. Turn: Bluetooth mode on if it is off.
5. Touch: Search for devices
6.Touch and Hold: TM-836
7. Touch: Connect
1. Open: Settings
2 .Open:wireless and network
3. Open: Bluetooth Settings
4. Turn: Bluetooth mode on if it is off.
5. Touch: Search for devices
6.Touch and Hold: TM-836
7. Touch: Connect
TO PAIR TO AN IPHONE OR IPAD
1 Open: Settings
2 Turn: Bluetooth mode on if it is off.
3 Touch: TM-836 found under devices.
4 Touch: The word TM-836 -it will
display: Connected
1 Open: Settings
2 Turn: Bluetooth mode on if it is off.
3 Touch: TM-836 found under devices.
4 Touch: The word TM-836 -it will
display: Connected
TO PAIR TO A MAC OS COMPUTER
1 Open :System Preferences
2 Open: Bluetooth function
3 Click: the + to add a Bluetooth device.
4 Select:TM-836
5 Click: Continue - The computer will
pair the device.
Input: the password is 0000 (if
necessary)
1 Open :System Preferences
2 Open: Bluetooth function
3 Click: the + to add a Bluetooth device.
4 Select:TM-836
5 Click: Continue - The computer will
pair the device.
Input: the password is 0000 (if
necessary)
TO PAIR TO A WINDOWS OS
COMPUTER
1 Open: Devices and Printers
2 Click : Add device
3 Select: TM-836 or Bluetooth headset
4 Click : Next
5 Input: the password is 0000 (if
necessary)
COMPUTER
1 Open: Devices and Printers
2 Click : Add device
3 Select: TM-836 or Bluetooth headset
4 Click : Next
5 Input: the password is 0000 (if
necessary)
Mode 2: Connect directly with supplied cable to the audio device
Plug the single end of the 2-in-1 cable (mini USB plug) into the TM-
836 speaker. The dual end of the 2-in-1 cable has a 3.5mm headphone
plug that can insert into any device with a corresponding 3.5 mm jack.
The audio signal will transmit through this connection.
Plug the single end of the 2-in-1 cable (mini USB plug) into the TM-
836 speaker. The dual end of the 2-in-1 cable has a 3.5mm headphone
plug that can insert into any device with a corresponding 3.5 mm jack.
The audio signal will transmit through this connection.
USB to 3.5mm 2 in 1 cable(INCLUDED)
WHAT THE BUTTONS DO:
On / Off button
This button turns the TM-836 on and off. Do not leave the TM-836
on if not use .
On / Off button
This button turns the TM-836 on and off. Do not leave the TM-836
on if not use .
Pause / Play
To pause or play audio when in Bluetooth mode. Press and hold
this button for switching to Line-in mode.
To pause or play audio when in Bluetooth mode. Press and hold
this button for switching to Line-in mode.
Volume + / -
Press and hold to increase(+) or lower(-) volume in all modes.
Press + once to play next tracks. Press – once to play last song.
Press and hold to increase(+) or lower(-) volume in all modes.
Press + once to play next tracks. Press – once to play last song.
1
2
3
4
5
6
1、
2、
3、
4、+ / V.UP/Next Song
5、 PAUSE/PLAY/Switch Mode 6、- / V.DOWN/Last Song
Earphone Port
ON/ OFF
Charging Port/Line In
WHAT THE LIGHTS MEAN.
LED Flash Rapidly: Bluetooth function is available and ready to
be paired
LED Flash Slowly: Paired and playing music
LED Flash every 30s and have beep sound: low battery indication
LED keeps lighting when connecting the charging port: charging
LED Flash Rapidly: Bluetooth function is available and ready to
be paired
LED Flash Slowly: Paired and playing music
LED Flash every 30s and have beep sound: low battery indication
LED keeps lighting when connecting the charging port: charging
TECHNICAL SPECIFICATIONS
1 Operating voltage: 3.7V
2 Charging Voltage: 5 V
3 Output Power: 3 W*2
4 Speaker spec : 40 mm, 4Ω3 W
1 Operating voltage: 3.7V
2 Charging Voltage: 5 V
3 Output Power: 3 W*2
4 Speaker spec : 40 mm, 4Ω3 W
1 Battery capacity: 750 mA/H
2 Frequency response: 60 Hz - 18 kHz
3 SNR: > 80 dB
4 SIZE: 160*60*45mm
5 Play time is approximately 2 hours
2 Frequency response: 60 Hz - 18 kHz
3 SNR: > 80 dB
4 SIZE: 160*60*45mm
5 Play time is approximately 2 hours
Information about products that generate electrical noise
The bluetooth speaker complies with FCC and Industry Canada RF radiation
exposure limits set forth for general population. The system must not be
colocated or operating in conjunction with any other antennas
or transmitters.
This device complies with Part 15 of the FCC Rules.
The bluetooth speaker complies with FCC and Industry Canada RF radiation
exposure limits set forth for general population. The system must not be
colocated or operating in conjunction with any other antennas
or transmitters.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,including interference that
may cause undesired operation.
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,including interference that
may cause undesired operation.
U.S.A. only
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, this is no guarantee that interference will not occur in a particular
installation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, this is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, you are encouraged
to try to correct the interference by one or more of the following measures:
which can be determined by turning the equipment off and on, you are encouraged
to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than the one to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than the one to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipmen
responsible for compliance could void the
user's authority to operate the equipmen
TM-836
User Manual
User Manual
LOW BATTERY WARNING
In Bluetooth mode -- "beep" sound warning in every 30s In MP3
mode -- "red" led flashing
In Bluetooth mode -- "beep" sound warning in every 30s In MP3
mode -- "red" led flashing
CHARGING YOUR TM-836
1.Connect the mirco USB cable to the speaker to charge
2.Connect the USB plug on any USB adaptor(not included). This
can be the USB port on a computer, wall adapter(not included) or
car charger (not included).
3.Once connected the TM-836, charging will be started
automatically.
4.To charge the device fully, it takes approximately 2 hours .
5.Partial charging will not affect the life of the battery.
1.Connect the mirco USB cable to the speaker to charge
2.Connect the USB plug on any USB adaptor(not included). This
can be the USB port on a computer, wall adapter(not included) or
car charger (not included).
3.Once connected the TM-836, charging will be started
automatically.
4.To charge the device fully, it takes approximately 2 hours .
5.Partial charging will not affect the life of the battery.
CHARGING WHILE PALYING
You can charge the TM-836 and play audio at the same time .
You can charge the TM-836 and play audio at the same time .
CARE OF YOUR TM-836
Do not let the TM-836 comes in contact with water.
Do not leave it in direct sunlight or under high temperature .
Clean with dry soft cloth .
Do not use harsh chemicals to clean .
Do not drop or place heavy objects on the TM-836 .
Never try to repair or open you TM-836 yourself.
Do not let the TM-836 comes in contact with water.
Do not leave it in direct sunlight or under high temperature .
Clean with dry soft cloth .
Do not use harsh chemicals to clean .
Do not drop or place heavy objects on the TM-836 .
Never try to repair or open you TM-836 yourself.
Bluetooth Speaker
R
Bluetooth Speaker
R
R
R
R
R
R
R
R
R
R
R
R
R