Inkmachines Sweden AB TPS-500 用户手册
Cleaning and hygienic
InkMachines
TPS-500
Rev 3.0 / 2018-05-25
25 (27)
Cleaning and hygienic
Cleaning
Caution! Never spray or pour fluids directly on any of the units, it can cause short circuit and will void the
warranty.
It
is
important for the tattoo operation to keep a clean and hygienic environment to avoid
infection.
infection.
Do NOT use alkaline or acid cleaning agents with strong bases (high or low pH). Only use pH neutral cleaning
agents and alcohol disinfectants. Use a damped piece of paper or cloth to gently wipe off surfaces of the units.
agents and alcohol disinfectants. Use a damped piece of paper or cloth to gently wipe off surfaces of the units.
Foot switch
Clean the Foot switch outside and inside to eliminate dirt and deposits as it could affect the function of the
Foot switch. Clean about 4 times a year depending on workload.
Foot switch. Clean about 4 times a year depending on workload.
Dismount the foot switch, see Exchange of foot switch battery on page 27. Use a damped piece of paper or
cloth and gently wipe it off.
cloth and gently wipe it off.
Preparation
Prepare all the tattoo machines before starting your session. Always clean the tattoo
machine according to their manuals before attaching the TPS-500 Powerpacks.
machine according to their manuals before attaching the TPS-500 Powerpacks.
All the touching normally takes place on the Main unit during the session so there is no need to touch the
Powerpacks during the session. To avoid contamination of the User interface (display and Control panel), wrap
up the user interface with plastic film before starting your session.
Powerpacks during the session. To avoid contamination of the User interface (display and Control panel), wrap
up the user interface with plastic film before starting your session.