Visteon Electronics Germany GmbH 9178 用户手册

External hard drives with capacity for over 32 GB

must be reformatted into the FAT32 file system,

depending on the conditions. Programs and in-

structions to perform such formatting process

are available on the Internet, for example.
Considering the wide range of different data

storage units and various iPod™, iPad™ and

iPhone™ generations, it is impossible to ensure

that all functions will be available.

iPod™, iPad™ and iPhone™
Depending on the country and equipment ver-

sion, iPods™, iPads™ or iPhones™ may be con-

nected to the vehicle's USB port , through a

suitable USB cable, and used as audio sources.

Disconnect
Connected data storage units must be prepared

for removal before being disconnected.

–

In the MEDIA main menu, touch the 



 func-

tion surface to open the Media settings menu.

–

OR: press the 

SETUP

 radio button.

–

Touch the function surface 

Remove

 and select



 USB

. The function surface is disabled after

the data storage unit is successfully removed.

–

The data storage unit may be disconnected.

Unreadable data storage unit
If a connected data storage unit contains unread-

able data, a corresponding message is shown on

the device display.

If an external Media Player is connected si-

multaneously via Bluetooth

®

 and the USB

port  to the device, the Bluetooth

®

 audio con-

nection is automatically disconnected after

switching to the USB port.

If a connected device cannot be recognized,

remove all connections and reconnect the

devices. Check whether the connection cable is

working, if necessary.

In case of operating faults in connected de-

vices, restart the respective device. This

usually solves the issue.

Do not use any memory card adapter, USB

extension cord, or USB-Hubs (USB distribu-

tors)!

Refer to the external data storage unit

manufacturer's operating manual.



The AUX-IN multimedia port 

6

 only

supports 3.5 mm jack plugs.
The external audio source connected is played

back through the vehicle's loudspeakers and can-

not be controlled by the device.
Connected external audio sources are indicated

by AUX on the display.

AUX-IN multimedia port
–

Reduce the volume on the radio.

–

Connecting an external audio source to the

AUX-IN multimedia port.

–

Start playback on the external audio source.

–

Press the radio 

MEDIA

 button to display the

available media sources selection menu

–

Press the function button 



.

The playback volume of external audio sources

must be adjusted to the volume of remaining au-

dio sources 

Selection of another

audio source on the

device.

The external audio

source continues to

play in the background.

Stop playback on the

external audio source.

The unit stays in the

AUX menu.

Remove the plug from

the AUX-IN multimedia

port.

The unit stays in the

AUX menu.

When the playback of the external audio

source is finished or is disconnected from

the multimedia AUX-IN port, the radio stays on

the AUX menu.

There may be noise interferences if the ex-

ternal audio source is used on the vehicle's

12 V power outlet.

Read and follow the external audio source

manufacturers operating instructions.

