Fibar Group S.A. FGPB101 用户手册

6

ADDInG/REMOvInG ThE DEvICE

Adding (Inclusion) - Z-Wave device learning mode, allowing to add 

the device to existing Z-Wave network.
To add the device to the Z-Wave network:
1.  Place the Button within the direct range of your Z-Wave controller.
2.  Set the main controller in (security/non-security) add mode (see 

the controller’s manual).

3.  Click the Button at least six times.
4.  Wait for the adding process to end.
5.  Successful adding will be confirmed by the Z-Wave controller’s 

message.

Removing (Exclusion) - Z-Wave device learning mode, allowing to 

remove the device from existing Z-Wave network.
To remove the device to the Z-Wave network:
1.  Place the Button within the direct range of your Z-Wave controller.
2.  Set the main controller in remove mode (see the controller’s 

manual).

3.  Click the Button at least six times.
4.  Wait for the removing process to end.
5.  Successful removing will be confirmed by the Z-Wave controller’s 

message.

Adding in security 

mode must be per-

formed up to 2 meters 

from the controller.

Removing the Button 

from the Z-Wave net-

work restores all the 

default parameters of 

the device.

In case the device is 

not added, repeat the 

adding procedure.