Fibar Group S.A. FGPB101 用户手册

7

OPERATInG ThE DEvICE

Waking up the device: 
The Button needs to be woken up to receive information about the 

new configuration from the controller, like parameters and associa-

tions. 
Click the Button 4 times to wake it up.

send action to associated devices (switch on/off by de-

fault) and/or trigger a scene
send action to associated devices (switch on maximum 

level by default) and/or trigger a scene
send action to associated devices (no action by default) 

and/or trigger a scene
wake the device up and/or trigger a scene
start reset procedure (press and hold for 5s to confirm) 

and/or trigger a scene
learning mode (adding/removing)
 

send action to associated devices (start level change up/

down) and/or trigger a scene
send action to associated devices (stop level change) 

and/or trigger a scene

Scene ID:
Every action with the 

 

Button is send to the main 

controller with Scene ID 

equal to 1. Controller recog-

nizes type of action using the 

attribute assigned to it.

Reset procedure of the Button: 
Reset procedure allows to restore the device back to its factory set-

tings, which means all information about the Z-Wave controller and 

user configuration will be deleted. In order to reset the device:
1.  Click the Button exactly five times.
2.  Press and hold the Button for at least 5 seconds.

Action

Attribute

1 click

Key Pressed 1 time

2 clicks

Key Pressed 2 times

3 clicks

Key Pressed 3 times

4 clicks

Key Pressed 4 times

5 clicks

Key Pressed 5 times

hold

Key held Down

Release

Key Released