Fibar Group S.A. FGPB101 用户手册
9
ADvAnCED PARAMETERS
#6: Advanced parameters
1. Scenes sent to the controller
This parameter determines which actions result in sending scene IDs
This parameter determines which actions result in sending scene IDs
and attributes assigned to them.
Available settings: 1 - Key Pressed 1 time
2 - Key Pressed 2 times
4 - Key Pressed 3 times
8 - Key Pressed 4 times
16 - Key Pressed 5 times
32 - Key held Down
64 - Key Released
4 - Key Pressed 3 times
8 - Key Pressed 4 times
16 - Key Pressed 5 times
32 - Key held Down
64 - Key Released
Default setting:
127 (all)
Parameter size:
1 [byte]
The Button allows to customize its operation to user’s needs. The set-
tings are available in the FIBARO interface as simple options that may
be chosen by selecting the appropriate box.
In order to configure the Button (using the hC controller):
1. Go to the device options by clicking the icon:
2. Select the „Advanced” tab.
3. Modify values of chosen parameters.
4. Save the changes.
5. Wake up the device manually to confirm changes (4 clicks).
In order to configure the Button (using the hC controller):
1. Go to the device options by clicking the icon:
2. Select the „Advanced” tab.
3. Modify values of chosen parameters.
4. Save the changes.
5. Wake up the device manually to confirm changes (4 clicks).
Wake up interval
Available settings: 0 or 3600-64800 (in seconds, 1h - 18h)
Default setting: 0
The Button will wake up at each defined time interval and always try to
Available settings: 0 or 3600-64800 (in seconds, 1h - 18h)
Default setting: 0
The Button will wake up at each defined time interval and always try to
connect with the main controller. After successful communication at-
tempt, the device will update configuration parameters, associations
and settings and then will go into Z-Wave communication standby.
After failed communication attempt (eg. no Z-Wave range) the device
After failed communication attempt (eg. no Z-Wave range) the device
will go into Z-Wave communication standby and retry to establish
connection with the main controller after the next time interval.
Setting wake up interval to 0 disables sending Wake up notification
Setting wake up interval to 0 disables sending Wake up notification
to the controller automatically. Wake up may be still performed man-
ually by clicking the Button 4 times.
NOTE
values of parameter
1 may be combined,
e.g. 1+2=3 means that
scenes will be sent
1 may be combined,
e.g. 1+2=3 means that
scenes will be sent
after pressing the but-
ton once or twice.
ton once or twice.
i
NOTE
Longer wake up time
interval means less
frequent communica-
tion and thus a longer
battery life.
interval means less
frequent communica-
tion and thus a longer
battery life.
i