ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED HK0001 用户手册
1
GWY004539 6T
Transmitter
1.
Transmitter components introduction
Antenna
Power button
1.LCD setting module connector
2.Wireless Sim USB connector
3.Charging connection wire connector
4.External data connector
2.Wireless Sim USB connector
3.Charging connection wire connector
4.External data connector
Transmitter battery box
Mode 3 / Mode 4 aileron trim
Mode 1 /Mode 3 elevator trim
Mode 2 / Mode 4 throttle trim
Mode 2 / Mode 4 throttle trim
Mode3 elevator and aileron stick
Mode4 throttle and aileron stick
Mode4 throttle and aileron stick
Mix / Hold
Aileron D/R
Aux 1
Trainer/Bind
Gear
3D switch (Mode 2/ Mode 4)
Elevator D/R
Flap Gyro
2.
Transmitter standard and parameters
1)The frequency bandwidth: ISM 2.4GHz (2.400~2.480GHz)
2)number of controller is 6CH
3)The current is not greater than 100 mA (exclude LCD setting module), not greater than 120 mA
(include LCD screen)
4)The battery is Li-Polymer battery (4.2V), the volume is 1100 mAh
2)number of controller is 6CH
3)The current is not greater than 100 mA (exclude LCD setting module), not greater than 120 mA
(include LCD screen)
4)The battery is Li-Polymer battery (4.2V), the volume is 1100 mAh
Tail Blade pitch (Mode 1/ Mode 3)
3D switch (Mode 1/ Mode 3);
Tail Blade pitch (Mode2 /Mode 4)
Tail Blade pitch (Mode2 /Mode 4)
Mode1 elevator and rudder stick
Mode2 throttle and rudder stick
Mode2 throttle and rudder stick
Mode 1 / Mode 2 rudder trim
Mode3 throttle and rudder stick
Mode4 elevator and rudder stick
Mode4 elevator and rudder stick
Mode1 throttle and aileron stick
Mode2 elevator and aileron stick
Mode2 elevator and aileron stick
Mode 1 /Mode 3 throttle trim
Mode 2 / Mode 4 elevator trim
Mode 2 / Mode 4 elevator trim
Mode 3 / Mode 4 rudder trim
Mode 1 / Mode 2 aileron trim
1)
2)
2)
3)
4)
5)
6)
4)
5)
6)
7)
The transmitter is using 2.4G ISM frequency channel, allow auto detection while using the transmitter.
The transmitter receive or distribute the frequency by ID identify technology, protect external jamming,
The transmitter receive or distribute the frequency by ID identify technology, protect external jamming,
provide stable and reliable during the operation.
The LCD setting module is dividable, user-friendly and setting the trim easily.
Interchanging interface easily (Change Mode + Menu setting)
Trainer connector is using wireless technology
The power button is using soft material to become the button, it is durable and change the connection
Interchanging interface easily (Change Mode + Menu setting)
Trainer connector is using wireless technology
The power button is using soft material to become the button, it is durable and change the connection
defect while pushing the roller power button
The transmitter is based on the ergonomic technology to design the transmitter
3.
Product Features