DIFFANY Development Co. Ltd. ID618 用户手册

下载
页码 1
Handfree calling : 
Part 1 pick up call:
1. When you have incoming call, press                to pick up the phone. 
2. Press               to increase the speaker volume 
3. Press                to decrease the speaker volume 
4. After finish the conversation, press             to hang up.
Part 2 make a call: 
1. Hold            for 2 seconds to redial the last call you dialed. 
2. Some smartphones have voice command, press  
   once to enter voice command function 
with your smartphone. For detail, please refer your smartphone instruction. This performance 
is different depending on your smartphone setting.
3. After finish the conversation, press            to hang up.   
Initializing the registration history / 
resetting the hardware of product:
Under the Off mode, hold   
         &               together until it sound a signal with red light.
**When the unit is connected to an audio device via an audio cable, please do not use the unit 
in a wet or damp environment, because the watertight cap cannot be closed to 
ensure waterproof performance.
**Note: To avoid / reduce echo, please do not turn the speaker to maximum.
On the off mode of speaker, directly connect line in cable with your device, then play and control the 
volume on your device. To save power, please ensure the speaker Bluetooth mode is on off status. 
Please note: these keys  
      /  
       /   
        /             /              are not functional while 
playing via line –in cable.
Using Aux Line in:
Part 3 pick up another incoming call:
1. While you are talking over the phone with another incoming call, press twice
to pick up
to switch to another party. 
to hang up the phone. 
Part 4 reject incoming call:
1. While it is ringing with incoming call, hold 
to reject the call.
2. Press twice
3. Press once
   This product is a precision electronic device. Avoid using/keeping this product in a location that is 
   subject to high temperature, high humidity or direct sunlight for many hours. When subject to 
   significant temperature changes in the environment, this product may malfunction due to condensation 
   inside the product.  
● Do not leave this product under high temperature conditions.
   Leaving this product in a hot car cabin for many hours will result in rupture of the built-in battery, 
   sparking, and other troubles, posing significant danger. 
● Never leave this product in a car.
   Static electricity or fouling may cause a malfunction or electric shock.
● Do not touch the metal parts of this product such as the power supply connectors and the 
   charging cable’s connector terminals.
   Do not repair, modify or disassemble this product on your own, unless operational instructions to the 
   contrary are given in this user’s manual. Electric shock, fire, or burns may result. 
● Do not disassemble this product.
   When this product is paired with a mobile phone, a loud ringtone may give you a shock, which in turn 
   may result in an accident or a heart attack. Gradually increase the volume from the minimum to set it 
   appropriately. 
● Please take full precautions when setting the ringtone volume.
 Fire and disconnection will result.
● Do not damage cables that are connected to this product.
● Make sure to close the watertight cap when using this product in a wet or damp environment. 
   Make sure to remove any dust, hair, etc., that is present between the watertight cap and the 
   main unit. 
   Any liquid entering this product may result in troubles, fire, or electric shock.
● Do not use/keep this product in a wet or damp environment for a long time if you do not use it.
   Unexpected accidents (ex. accidental ingestion) may result.
● Do not keep this product within reach of small children.
   This product can be wirelessly connected to iPhones, mobile phones, etc. The setting procedures and 
   precautions are different depending on the devices to be connected to this product. Carefully read the 
   user’s manual for these devices and observe any precautions. 
● Follow the user’s manual instructions of devices (ex. iPhones and mobile phones) to be 
   connected to this product.
● This product is a precision electronic device. Avoid using/keeping this product in 
   an environment that is subject to impact/vibration, strong magnetic forces, static electricity, etc. 
Warning:  Changes or modifications to this unit not expressly approved by the party responsible
                  for compliance could void the user authority to operate the equipment.
NOTE:  This equipment has been tested and found to comply with the limits for a Class B digital
             device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide
             reasonable protection against harmful interference in a residential installation.  This
             equipment generates, uses and can radiate radio frequency energy and, if not installed
             and used in accordance with the instructions, may cause harmful interference to radio
             communications.
However, there is no guarantee that interference will not occur in a particular installation.  If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
   connected.
● Consult the dealer or an experienced radio/TV technician for help.
Caution
FCC Requirement
incoming call.
2. If you are playing the song, press 
    once again to continuously playing the song.
Waterproof Wireless Stereo Speaker With Microphone
Instruction Manual
This product in waterproof construction design with quality stereo sound can enrich and upgrade 
your lifestyle, enjoy your favor music at anywhere at anytime. Its Bluetooth wireless system can be able 
to pair with your devices (such as tablets, notebooks, smartphones) easily. Also, built-in microphone 
can let you talk over the phone while you are in bath.
Product Description:
Bluetooth LED
light indicator
Before using this unit:
Please ensure that the                 watertight cap of the DC/ line in plug is completed closed before using 
this unit. Trouble attribute to water seeping into the unit from to loosely closed watertight cap are not 
covered by the warranty. 
Water droplets that enter the speaker or microphone holes do not cause troubles. However, the product 
performance may temporarily decrease until the water droplets are dried. Problems may include unclear 
sound and difficulties in getting your voice clearly. If such circumstances exist, please remove water 
droplets and dry the product.
Product Specifications: 
Bluetooth V2.1 +EDR  A2DP and AVRCP
#The actual continuous standby/transmission times may become shorter than those in the specifications depending on the environment or 
  conditions for keeping/using the unit, etc.
#Batteries are consumables. The battery service time gradually decreases after the charging and discharging cycles, even if the batteries 
  are used properly.
#The battery performance deteriorates quickly if the unit is kept under high temperature conditions. Please keep the unit in a cool, 
   well-ventilated location, away from direct sunlight.
8
Phone On/Off button
Volume down
Volume up 
Restart the track
Play next track
Pause/ Play
Microphone
Handle 
AUX line in plug 
DC 5V adapter plug 
Battery door 
Stand 
Bluetooth version
Operating range (maximum)
SNR:
Impedance:
Power Output
Power supply
Current consumption:
Continuous standby time: #
Continuous transmission time: #
10 m (The transmission distance changed depending
 on the environment where the product is used. 
≥80dB
4ohm
3 Watts x 2 speakers
8 hours
4pcs x AA Battery (Alkaline batteries are recommended)
5V DC plug is optional
 500 mA (Max)
180 Hours
Operating Temperature: 
Operating humidity range:
Product size:
Weight:
Waterproof performance:
Number of devices that can be registered
0 °C to – 40 °C
20-80% (no condensation)
199 (L) x 45 (W) x 89 (H)mm
Approx. 294g
IP47
Pairing the product with your device:
1. To turn on the product, hold                for around 7 seconds, a signal will sound ‘beep~”, keep pressing
    until red & blue light are flashing, and hear sound ‘popo’, means it is ready to be paired. 
2. At this first time to pair, use your device to search the product model “#Bluetooth-Speaker#”.  
3. When your device search the product model, press to connect, your device will show if it is 
    successfully connected or not. 
4. If it is successfully connected, you can play music through the product.
Noted: 
▪ Terminate any connection between the product and any device before starting the paring procedure. 
▪ The pairing procedure cannot be started while a Bluetooth connection is established between the 
  product and a registered device. Terminate the connection and turn off the product.
▪ Noted that the pairing procedure cannot be started while the product is connected to a device via an 
  AUX line in cable.
Up to eight Bluetooth device can be registered:
When nine or more devices are registered, the previously registered devices will be 
deleted starting from the oldest, to register new ones. A device that is registered 
twice or more is identified as one device.
SIZE: 180(W) X 290(H)mm
COLOUR: BLACK
Watertight cap
Installing batteries:
▪ Turn to open the battery door according to the indicator. 
▪ Please follow the polarity indicated inside of battery compartment. 
▪ Put 4 piece of AA battery (Alkaline batteries are recommended). 
▪ Optionally power by DC adapter 5V . 
  (Please note that while operating by DC 5V adapter, do not use in wet place)
▪ When the battery power is used up, a beeping alarm will sound, with the LED lamp blinking red. 
   After a while, speaker will turn off.
       
Waterproof performance:
       The waterproof level of this product complys with IP47 standards, is designed to ensure normal 
       operation in water at a specified conditions.
Play music:
Press             to increase the volume. (when up to maximum, it will have ‘Beep ~’ sound) 
Press 
         to decrease the volume. (when up to minimum, it will have ‘Beep ~’ sound) 
Press              to restart the current track. Press twice to play previous track.
Press              to play next track.
Press              to pause/ play the track.